Sony ILCE-7SM2 Help Guide Printable PDF - Page 289
There is something wrong in the Image Database File. Select [Setup]
View all Sony ILCE-7SM2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 289 highlights
Images recorded with other products or images modified with a computer may not be displayed. Processing on the computer such as deletion of the image files may cause inconsistencies in the image database files. Repair the image database files. Cannot recognize lens. Attach it properly. The lens is not attached properly, or the lens is not attached. If the message appears when a lens is attached, reattach the lens. If the message appears frequently, check whether the contacts of the lens and product are clean or not. When attaching the product to an astronomical telescope or something similar, set [Release w/o Lens] to [Enable]. Unable to print. You tried to mark RAW images with a DPOF mark. Internal temp. high. Allow it to cool. The product has become hot because you have been shooting continuously. Turn the power off. Cool the product and wait until the product is ready to shoot again. You have been recording images for a long time, the product temperature has risen. Stop recording images until the product cools. Recording is unavailable in this movie format. Set [ File Format] to [MP4]. The number of images exceeds that for which date management in a database file by the product is possible. Unable to register to the database file. Import all the images to a computer and recover the memory card. Image DataBase File error There is something wrong in the Image Database File. Select [Setup] → [Recover Image DB]. System Error Camera Error. Turn power off then on. Remove the battery pack, and then re-insert it. If the message appears frequently, consult your Sony dealer or local authorized Sony service facility.