Sony KDF-60XBR950 Operating Instructions - Page 28
Cable Box and Cable, through the cable box to the LCD projection TV's VHF/UHF input jack. - light
UPC - 027242633186
View all Sony KDF-60XBR950 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
Installing and Connecting the LCD Projection TV Cable Box and Cable Only For best results, use this connection if: ❑ Your cable company scrambles some channels, such as premium channels (which requires you to use a cable box), but does not scramble all channels. ❑ You do not have a VCR. (If you have a VCR, see pages 32 and 33.) With this connection you can: ❑ Use the LCD projection TV remote control to change channels coming through the cable box to the LCD projection TV's VHF/UHF input jack. (You must first program the remote control for your specific cable box; see "Programming the Remote Control" on page 48.) ❑ Use the LCD projection TV remote control to change channels coming directly into the LCD projection TV's CABLE input. (The LCD projection TV's tuner provides a better signal than the cable box.) CATV cable Splitter Coaxial cable Coaxial cable IN OUT Cable box Coaxial cable VHF/UHF CABLE Rear of LCD projection TV About Using This Connection with Dual Picture (Twin View, etc.) Features With this connection, you can use all the dual picture features for unscrambled channels coming directly into the LCD projection TV's CABLE input jack. Notes on Using This Connection To Do This ... Use the cable box Set up the LCD projection TV remote control to operate the cable box Activate the remote control to operate the cable box Do This ... Tune the LCD projection TV to the channel the cable box is set to (usually channel 3 or 4) and then use the cable box to switch channels. Program the remote control. See "Programming the Remote Control" on page 48. Press FUNCTION repeatedly until the SAT/ CABLE indicator lights up. 28