Sony KDL-46V25L1 Instructions - Page 9
Step 5: Installing the TV or monitor on the Plate Unit, Attach the Mounting Hook Units - wall mount
View all Sony KDL-46V25L1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Step 5: Installing the TV or monitor on the Plate Unit If you intend to install a TV or monitor that is not specified on page 2, be sure to refer to the leaflet "Installing the WallMount Bracket" supplied with your TV or monitor. WARNING Be sure to complete the installation before connecting the AC power cord to the wall outlet. If you allow the AC power cord to be pinched under or between pieces of equipment, this may result in a short circuit or an electric shock. Be careful not to stumble over the AC power cord or the TV or monitor, as you may hurt yourself. 2 Connect the AC power cord and the connecting cable(s) supplied with the TV or monitor to the TV or monitor. Connect the AC power cord and the connecting cable(s) to the connectors on the rear side of the TV or monitor. For details on connecting the AC power cord and the connecting cable(s), refer to the instruction manual of the TV or monitor. When you route the cord and the cable in the wall, feed them through the bored hole (page 13). Notes • You cannot connect the cables to the TV or monitor after installing it on the Plate Unit. • Subcontract the cable routing in the wall to licensed contractors. 1 Attach the Mounting Hook Units on the hooks on the rear side of the TV or monitor. Then slide the Mounting Hook Units, as illustrated below, and secure them using the supplied screws (+PSW5 × L16). Soft cloth Rear side of the TV or monitor Note Be sure not to use any screws other than the supplied ones (+PSW5 × L16) when securing the Mounting Hook Units. (Continued) 9 (GB)