Sony KDL-52XBR10 Operating Instructions - Page 11
Video/Component 1 Selection, Channels & Inputs - media box
UPC - 027242765832
View all Sony KDL-52XBR10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Getting Started Item Description 1 HDMI IN 1/2/3/4 HDMI (High-Definition Multimedia Interface) provides an uncompressed, all- AUDIO IN digital audio/video interface between this unit and any HDMI-equipped audio/video R-AUDIO-L equipment, such as a set-top box, DVD player, and A/V receiver. HDMI supports enhanced, or high-definition video, plus digital audio. Be sure to use only an HDMI cable that bears the HDMI logo. Use the HDMI IN 1 port when connecting DVI equipment with a DVI-to-HDMI cable or adapter (not supplied). Equipment using a DVI connection also requires an additional audio connection using an audio cable connected to AUDIO (L/R). 2 USB Connects to USB equipment to access photo, music, and video files. 3 SERVICE ONLY This port is for service only. 4 VIDEO 2 IN L (MONO)AUDIO-R Connects to the composite video and audio output ports on your A/V equipment. If you have mono equipment, connect its audio output port to the media receiver's L (MONO) audio input port. 5 AC IN Connects to your power source. Connect the supplied power cord to AC IN and the nearest wall outlet. 6 VIDEO IN 1/ COMPONENT IN 1 (1080p/ 1080i/720p/ 480p/480i)/ R-AUDIO-L This input port can be used as composite video input (VIDEO 1) or as component video input (COMPONENT 1). For composite use, connect the yellow jack to Y for video and use audio (L/R) for audio signals. For component connection, use Y, PB, PR for video signals and also connect the audio (L/R) for audio signals. By default, this unit will automatically detect and switch between VIDEO 1 and COMPONENT 1. To manually set the input type, press HOME, select Settings, then Channels & Inputs, then select Video/Component 1 Selection. 7 AUDIO OUT (VAR/FIX) R-AUDIO-L Connects to the left and right audio input jacks of your analog audio equipment. You can use these outputs to listen to your unit's audio through your stereo system. 8 PC IN (RGB/AUDIO) Connects to a personal computer's video and audio output connector. Can also be connected to other analog RGB equipment. For some Apple Macintosh computers, it may be necessary to use an adapter (not supplied). If an adapter is used, connect the adapter to the computer before connecting the HD15-HD15 cable. You may need to adjust the unit settings or your PC's resolution and timing (see page 14). 9 REMOTE This jack is for receiving the external control signal. 0 CABLE/ ANTENNA RF input that connects to your cable or over-the-air antenna. qa COMPONENT Component video provides better picture quality than the composite video. IN 2 Audio connection is required for the COMPONENT IN ports, connect audio (L/R). qs DIGITAL AUDIO Connects to the optical audio input of digital audio equipment that is PCM/Dolby* OUT (OPTICAL) Digital compatible. qd DMex/SERVICE This USB port is only for service unless you are connecting an optional BRAVIA Link module (DMex). qf LAN Connects to an existing network using an Ethernet cable. Be sure to complete Network Setup (page 21). * Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. 11