Sony KDL-52XBR10 Operating Instructions - Page 50

Specifications Media receiver Model System Television system Channel coverage Input/Output jacks CABLE/ANTENNA VIDEO IN 1/2 COMPONENT IN 1/2 HDMI IN 1/2/3/4 AUDIO OUT DIGITAL AUDIO OUT (OPTICAL) PC IN PC AUDIO INPUT USB DLNA Power and others Power requirement Power consumption in use in DAM* in standby Dimensions Mass (mm) (inches) (kg) (lb.) MBT-WZ5 NTSC: American TV standard ATSC (8VSB terrestrial): ATSC compliant 8VSB QAM on cable: ANSI/SCTE 07 2000 (Does not include CableCARD functionality) Analog terrestrial: 2 - 69 / Digital terrestrial: 2 - 69 Analog Cable: 1 - 135 / Digital Cable: 1 - 135 75-ohm external terminal for RF inputs VIDEO: 1 Vp-p, 75 ohms unbalanced, sync negative AUDIO: 500 mVrms (Typical) / Impedance: 47 kilohms YPBPR (Component Video): Y: 1.0 Vp-p, 75 ohms unbalanced, sync negative / PB: 0.7 Vp-p, 75 ohms / PR: 0.7 Vp-p, 75 ohms / Signal format: 480i, 480p, 720p, 1080i, 1080p AUDIO: 500 mVrms (Typical) / Impedance: 47 kilohms HDMI: Video: 480i, 480p, 720p, 1080i, 1080p, 1080/24p Audio: Two channel linear PCM 32, 44.1 and 48 kHz, 16, 20 and 24 bits, Dolby Digital AUDIO (HDMI IN 1 only): 500 mVrms (Typical) / Impedance: 47 kilohms 500 mVrms (typical) PCM/Dolby Digital optical signal D-sub 15-pin, analog RGB, 0.7 Vp-p, 75 ohms, positive See the PC Input Signal Reference Chart on page 14. Stereo mini jack, 500 mVrms, (Typical) / Impedance: 47 kilohms MPEG2, MP3, and JPEG. MPEG2, LPCM, MP3, and JPEG. 120 V AC, 60 Hz 30 W 24 W (You may hear a clicking noise during the download but this is normal.) 0.45 W 430 × 68 × 284 17 × 2 3/4 × 11 1/4 4.1 9.0 * Download Acquisition Mode (DAM) is used for software updates and/or collecting data for TV Guide On Screen. ~ • Optional accessories availability depends on its stock. • Design and specifications are subject to change without notice. 50