Sony KLV-23HR2 Operating Instructions - Page 13
Connecting a Satellite Receiver
View all Sony KLV-23HR2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Connecting a Satellite Receiver Installing and Connecting the TV Disconnect all power sources before making any connections. 1 Connect the satellite antenna cable to the satellite receiver's SATELLITE IN jack. 2 Using AUDIO and S VIDEO cables, connect the satellite receiver's AUDIO and S VIDEO OUT jacks to the TV's AUDIO and S VIDEO IN jacks. 3 Connect the supplied 75-ohm coaxial cable from your cable or antenna to the TV's VHF/UHF jack. Rear of TV 75-ohm coaxial cable (supplied) S VIDEO Satellite receiver Satellite antenna cable VIDEO (yellow) AUDIO-L (white) AUDIO-R (red) S VIDEO cable (not supplied) AUDIO cable (not supplied) Note To watch the pictures input from the S VIDEO input jack, set "Auto YC" to "On" in the (Setup) menu (See page 12). Tips • You can also use the VIDEO 2 IN jacks to connect your satellite receiver. • If your satellite receiver is not equipped with S VIDEO, use a VIDEO cable (yellow) instead of the S VIDEO cable. 13