Sony KLV-32M1 Operating Instructions - Page 25
Connecting a VCR and Cable TV - power supply
View all Sony KLV-32M1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
Connecting a VCR and Cable TV Connecting and Setting the TV Use this hookup if: • You subscribe to a cable TV system that does not require a cable box. Disconnect all power sources before making any connections. 1 Connect the CATV cable to the VCR's IN jack. 2 Using the supplied 75-ohm coaxial cable, connect the VCR's OUT jack to the TV's VHF/UHF jack. 3 Using A/V and S VIDEO cables, connect the VCR's AUDIO and S VIDEO OUT jacks to the TV's AUDIO and S VIDEO IN jacks (VIDEO 1 IN or VIDEO 3 IN). Tip If your VCR is not equipped with S VIDEO, use a VIDEO cable (yellow) instead of the S VIDEO cable. 75-ohm coaxial cable (supplied) 75-ohm coaxial cable (supplied) Rear of TV VHF/UHF VCR Cable S VIDEO cable (not supplied) AUDIO-R (red) AUDIO-L (white) VIDEO (yellow) S VIDEO VIDEO IN 1 AUDIO VIDEO S VIDEO R L (MONO) 3 4 AUDIO HD/DVD IN R L Y PB PR R L AUDIO OUT (VAR/FIX) CENTER SPEAKER IN 180W (6 ) MAX A/V cable (not supplied) Note When you connect video equipment to both the VIDEO and the S VIDEO input jacks, make sure "Auto YC" in the (Setup) menu is set to "On" to view the S VIDEO input (see below). Tip You can also use the VIDEO 2 IN jacks located on the front of the TV to connect your VCR. When connecting both VIDEO IN and S VIDEO IN Using the menu, you can select the jack from which the TV receives the input signal. You can set it for each video input (VIDEO 1 IN, VIDEO 2 IN and VIDEO 3 IN) separately. The TV is factory set to receive S VIDEO input signals. 1 Press VIDEO 1/2/3 repeatedly until the desired video input appears. 2 Press MENU. 3 Press V/v to select (Setup), then press . 4 Press V/v to select "Auto YC," then press . 5 To watch the pictures input from the S VIDEO input jack: Press V/v to select "On," then press . To watch the pictures input from the VIDEO input jack: Press V/v to select "Off," then press . 6 Press MENU to exit the menu screen. 25