Sony KLV-32M1 Operating Instructions - Page 29
Connecting a DVD Player with Component Video Connectors
View all Sony KLV-32M1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Connecting and Setting the TV Connecting a DVD Player with Component Video Connectors Use this hookup if: • Your DVD player has component (Y, PB, PR) jacks. Tips • The Y, PB and PR jacks on your DVD player are sometimes labeled as Y, CB and CR, or Y, B-Y and R-Y. If so, connect the cables to the matching colors. • To take advantage of the Wide Screen Modes, set the aspect ratio of the output signal to 16:9 on your DVD player. For details, refer to the operating instructions supplied with your DVD player. Disconnect all power sources before making any connections. 1 Using a component video cable, connect the DVD player's Y, PB and PR jacks to the Y, PB and PR jacks on the TV. Use the HD/DVD 4 IN connections. 2 Using an AUDIO cable, connect the DVD player's AUDIO OUT jacks to the TV's AUDIO IN jacks. Note The Y, PB and PR jacks do not provide audio, so audio cables must be connected to provide sound. Rear of TV AUDIO-L (white) AUDIO-R (red) AUDIO cable (not supplied) Y PB VIDEO IN 1 AUDIO VIDEO S VIDEO R L (MONO) 3 4 AUDIO HD/DVD IN R L Y PB PR R L AUDIO OUT (VAR/FIX) CENTER SPEAKER IN 180W (6 ) MAX Component video cable (not supplied) PR DVD Player 29