Sony KLV-32M1 Operating Instructions - Page 30
Connecting a DVD Player with S Video and Audio Connectors
View all Sony KLV-32M1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
Connecting a DVD Player with S Video and Audio Connectors Use this hookup if: • Your DVD player does not have component (Y, PB, PR) jacks. Tips • If your DVD player has component video output connectors, for best picture quality, use the connection described on page 29. • The Y, PB and PR jacks on your DVD player are sometimes labeled as Y, CB and CR, or Y, B-Y and R-Y. If so, connect the cables to the matching colors. • To take advantage of the Wide Screen Modes, set the aspect ratio of the output signal to 16:9 on your DVD player. For details, refer to the operating instructions supplied with your DVD player. Disconnect all power sources before making any connections. 1 Using an A/V cable, connect the DVD player's AUDIO OUT jacks to the TV's AUDIO IN jacks. 2 Using an S VIDEO cable, connect the DVD player's S VIDEO OUT jack to the TV's S VIDEO IN jack (VIDEO 1 IN or VIDEO 3 IN). Tip If your DVD player is not equipped with S VIDEO, use a VIDEO cable (yellow) instead of the S VIDEO cable. Rear of TV A/V cable (not supplied) AUDIO-R (red) AUDIO-L (white) VIDEO (yellow) S VIDEO S VIDEO cable (not supplied) VIDEO IN 1 AUDIO VIDEO S VIDEO R L (MONO) 3 4 AUDIO HD/DVD IN R L Y PB PR R L AUDIO OUT (VAR/FIX) CENTER SPEAKER IN 180W (6 ) MAX DVD Player Note When you connect video equipment to both the VIDEO and the S VIDEO input jacks, make sure "Auto YC" in the (Setup) menu is set to "On" to view the S VIDEO input (see page 25). Tips • You can also use the VIDEO 2 IN jacks located on the front of the TV to connect your DVD player. • Use VIDEO 1/2/3 on the remote control to switch to the DVD player input. 30