Sony KLV-32M1 Operating Instructions - Page 26
Connecting a Satellite Receiver - remote control
View all Sony KLV-32M1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
Connecting a Satellite Receiver Disconnect all power sources before making any connections. 1 Connect the satellite antenna cable to the satellite receiver's SATELLITE IN jack. 2 Using A/V and S VIDEO cables, connect the satellite receiver's AUDIO and S VIDEO OUT jacks to the TV's AUDIO and S VIDEO IN jacks (VIDEO 1 IN or VIDEO 3 IN). Tip If your satellite receiver is not equipped with S VIDEO, use a VIDEO cable (yellow) instead of the S VIDEO cable. 3 Connect the supplied 75-ohm coaxial cable from your cable or antenna to the TV's VHF/UHF jack. Satellite Receiver Satellite antenna cable S VIDEO cable (not supplied) A/V cable (not supplied) 75-ohm coaxial cable (supplied) Rear of TV VHF/UHF AUDIO-R (red) AUDIO-L (white) VIDEO (yellow) S VIDEO VIDEO IN 1 AUDIO VIDEO S VIDEO R L (MONO) 3 4 AUDIO HD/DVD IN R L Y PB PR R L AUDIO OUT (VAR/FIX) CENTER SPEAKER IN 180W (6 ) MAX Note When you connect video equipment to both the VIDEO and the S VIDEO input jacks, make sure "Auto YC" in the (Setup) menu is set to "On" to view the S VIDEO input (see page 25). Tips • You can also use the VIDEO 2 IN jacks located on the front of the TV to connect your satellite receiver. • Use VIDEO 1/2/3 on the remote control to select VIDEO 1 IN (or VIDEO 3 IN if you use the VIDEO 3 IN jacks for this hookup) to watch satellite TV. 26