Sony KV-1354R Primary User Manual - Page 16
External, Antenna, Connection
View all Sony KV-1354R manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
EXTERNAL ANTENNA CONNECTION The indoor telescopic dipole antenna and loop antenna will provide good reception in most reception areas. If you cannot obtain satisfactory reception with them, the use of an outdoor antenna is recommended. 1 Remove the indoor antennas from the antenna terminals of the TV. 2 Connect an external antenna to the VHF and/or UHF antenna terminal(s) corresponding to its form. VHF antenna When the cable is a 75-ohm coaxial type (round) F-type connector (optional) VHF UHF When the cable is a 300-ohm ribbon type lead-in (flat) 5 mm (3r„ in.) 2 mm (1/a in.) 10 mm (7/18 in.) Fold back braid. Pass the ring over cable. Antenna connector removed from the supplied indoor VHF antenna 15 mm (5/8 in.) Connect the leads. Crimp. UHF antenna 300-ohm ribbon type wire )'. 04 Connect the wire and tighten the screws. VHF - UHF - Fasten with a screwdriver. 1 Combination VHF/UHF antenna Most combination antennas already have a signal splitter. If you need a splitter or a complete antenna system, see your Sony dealer or a qualified technician. VHF - UHF - VHF-UHF I signal splitter 16