Sony KV-1354R Primary User Manual - Page 17

SPECIFICATIONS K11.1354R11355R Television system American TV standards Channel coverage VHF channels 2 - 13 UHF channels 14 - 83 (a total of up to 14 preselected channels) Picture tube Trinitron tube 13-inch picture measured diagonally 90-degree deflection Antenna VHF telescopic dipole antenna 75-ohm external antenna terminal for VHF UHF loop antenna 300-ohm external antenna terminals for UHF Hit connector Auxiliary RF input for one channel between VHF ch. 2 through ch. 6 75-ohm (F-type) Speaker 9 x 5 cm (31/3 x 2 inches) Power requirements 120 V ac, 60 Hz Power consumption 90 W max., 58 W average 2.2 W (in standby condition) Dimensions Approx. 392 x 355 x 412 mm (w/h/d) (151/2 x 14 x 161/4 inches) Weight Approx. 11.3 kg (24 lb 15 oz) Accessories supplied Remote Commander RM-714 VHF telescopic dipole antenna AN-18 Antenna connector UHF loop antenna AN-15 Phono-F plug adaptor EAC-88 Earphone ME-20B Remote Commander RM-714 Remote control system Infrared control Power requirements 3 V dc Battery size AA x 2 (IEC Battery Des,ignation R6) Dimensions Approx. 60 x 20 x 150 mm (w/h/d) (21/e x 1/8 x 6 inches) Weight Approx. 130 g (4.6 oz) incl. batteries Accessories supplied Battery size AA (2 pcs.) Channel number segments (1 set) Design and specifications subject to change without notice. TROUBLE CHECKS Many apparent malfunctions may be caused by slight misadjustments of the regular controls or some other equally simple cause. If any difficulty arises in the operation of your set, first check through this list of symptoms and corrections. Should the difficulty persist, unplug the set and contact your Sony dealer. SYMPTOM no picture (screen not lit), no sound CORRECTION • Plug the set into a working outlet. • Press the POWER switch on the TV or the Commander. • Before pressing the Hit button, connect equipment to the Hit connector. no picture (screen not lit), but good sound • Turn the BRIGHT or PICTURE control clockwise. good picture but no sound no picture, no sound, but snow and noise only • Press the + VOLUME button. • Release the sound muting by pressing the MUTING button. • Adjust the indoor antenna. • Connect the antenna properly. • Check the outdoor antenna. • Perform the channel presetting as described on page 12. • Release the Hit button. no color • Perform the channel presetting as described on page 12. herringbone pattern, stripes, no color, no ,, picture, too indistinct, etc. ' • Perform the channel preset ting as described on page 12. dotted lines or i•-•:;,-'AI:''Y'-- • stripes ... ' Ei-Often caused by interference from autos, neon signs, hair dryers, electric razors, etc. Try adjusting the antenna for minimum interference. double images or "ghosts" z- r: 41.• '-xitil • Reflections from nearby mountains or buildings often cause this problem. In such cases, a highly directional outdoor antenna may improve the picture. 17