Sony MDS-JE470 Service Manual - Page 22
Note 1, 5-1. Operating the Continuous Playback Mode
View all Sony MDS-JE470 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
MDS-JE470 4-5-1. Operating the Continuous Playback Mode 1. Entering the continuous playback mode 1 Set the disc in the unit. (Whichever recordable discs or discs for playback only are available.) 2 Rotate the l AMS L knob and display "CPLAY1 MODE"(C34). 3 Press the YES button to change the display to "CPLAY1 MID". 4 When access completes, the display changes to "C = AD = ". Note : The numbers " " displayed show you error rates and ADER. 2. Changing the parts to be played back 1 Press the YES button during continuous playback to change the display as below. "CPLAY1 MID" t "CPLAY1 OUT" t "CPLAY1 IN" When pressed another time, the parts to be played back can be moved. 2 When access completes, the display changes to "C = AD = ". Note : The numbers " " displayed show you error rates and ADER. 3. Ending the continuous playback mode 1 Press the MENU/NO button. The display will change to "CPLAY1 MODE"(C34). 2 Press the AEJECT button to remove the disc. Note : The playback start addresses for IN, MID, and OUT are as follows. IN 40h cluster MID 300h cluster OUT 700h cluster 4-5-2. Operating the Continuous Recording Mode (Use only when performing self-recording/palyback check.) 1. Entering the continuous recording mode 1 Set a recordable disc in the unit. 2 Rotate the l AMS L knob and display "CREC1 MODE" (C35). 3 Press the YES button to change the display to "CREC1 MID". 4 When access completes, the display changes to "CREC 1 ( )" and REC lights up. Note : The numbers " " displayed shows you the recording position addresses. 2. Changing the parts to be recorded 1 When the YES button is pressed during continuous recording, the display changes as below. "CREC1 MID" t "CREC1 OUT" t "CREC1 IN" When pressed another time, the parts to be recorded can be changed. REC goes off. 2 When access completes, the display changes to "CREC 1 ( )" and REC lights up. Note : The numbers " " displayed shows you the recording position addresses. 3. Ending the continuous recording mode 1 Press the MENU/NO button. The display changes to "CREC1 MODE" (C35) and REC goes off. 2 Press the A EJECT button to remove the disc. Note 1 : The recording start addresses for IN, MID, and OUT are as follows. IN 40h cluster MID 300h cluster OUT 700h cluster Note 2 : The MENU/NO button can be used to stop recording anytime. Note 3 : Do not perform continuous recording for long periods of time above 5 minutes. Note 4 : During continuous recording, be careful not to apply vibration. 22