Sony MEXBT5700U Operating Instructions - Page 21

Operating an iPod directly - Passenger control You can operate an iPod connected to the dock connector directly. 1 During playback, press and hold (MODE). "Mode iPod" appears and you will be able to operate the iPod directly. To exit the passenger control Press and hold (MODE). Then "Mode Audio" will appear and the play mode will change to "Resuming Mode." Notes • The volume can be adjusted only by the unit. • If this mode is canceled, the repeat setting will be turned off. Bluetooth (Handsfree calling and Music streaming) Before using the Bluetooth function Bluetooth operations To use the Bluetooth function, the following procedure is necessary. 1 Pairing When connecting Bluetooth devices for the first time, mutual registration is required. This is called "pairing." This registration (pairing) is required only for the first time, as this unit and the other devices will recognize each other automatically from the next time. You can pair up to 9 devices. (Depending on the device, you may need to input a passcode for each connection.) 2 Connection To use the device after pairing is made, start the connection. Sometimes pairing allows to connect automatically. 3 Handsfree calling/Music streaming You can talk handsfree and listen to music when the connection is made. For details of usable devices, visit the following support site. Support site http://esupport.sony.com http://www.xplodsony.com/ Configuring Bluetooth Settings Before connecting to a Bluetooth device, configure the Bluetooth Settings on this unit. 1 Press (BT). The Bluetooth settings menu appears. 2 Rotate the control dial until the desired menu item appears, then press the select button. Depending on the setting, by rotating the control dial again, other items can be set. 21 continue to next page t