Sony MEXBT5700U Operating Instructions - Page 22
External microphone XA-MC10, Settings menu - installation
UPC - 027242744875
View all Sony MEXBT5700U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
3 Rotate the control dial to select the setting, then press the select button. To return to the previous display Press (BACK). To exit the Bluetooth settings menu Press (BT). Bluetooth Settings menu Signal Switches the Bluetooth signal output of this unit to "on" or "off." - "on": to output the Bluetooth signal. - "off": to not output the Bluetooth signal. Be sure to set to "on" when you connect from a Bluetooth device. Visibility Allows other Bluetooth devices to search for this unit. - "Show": to allow the other device to search. - "Hide": to not allow the other device to search. Be sure to set to "Show" when you search for this unit from a Bluetooth device. Device Name Changes the name of this unit displayed on connected device. (Default setting: "XPLOD") Select "Rename" and input characters. Up to 13 characters can be input. To restore "XPLOD," select "Default." Search Searches for other Bluetooth devices (page 23). Device List Shows the list of registered devices. Select the name of device to connect / to disconnect from this unit. To delete all devices, select "Delete All." Auto Answer "off": to not start a call until (handsfree) is pressed. - "Short": to start a call automatically when received, about 3seconds later. - "Long": to start a call automatically when received, about 10seconds later. Ringtone Switches the ring tone. - "Cellular*1": to output the ring tone set with the cellular phone. - "Default": to output this unit's ring tone. EC/NC Mode*2 (Echo Canceller/Noise Canceller Mode) Reduces echo and noise in phone call conversations. Set to "Mode 1" normally. If the quality of the outgoing sound is unsatisfactory, set to "Mode 2" or "off." 22 MIC Gain*2 Changes the volume level: "-2," "-1," "0," "+1," "+2." MIC Select*3 - "External": to automatically switch to the external microphone when it is connected. - "Internal": to select only the Built-in Microphone. Initialize Initializes all Bluetooth-related settings (page 29). *1 Depending on the cellular phone, this unit's ring tone may be output even if set to "Cellular." *2 Configurable during a call. *3 Cannot be switched during a call. Notes • For details on the settings of other Bluetooth devices, see their respective manuals. • If you select "Initialize," all stored settings of the Call menu and Bluetooth Settings menu are deleted. External microphone XA-MC10 By connecting an external microphone to the microphone input connector, you can improve audio quality while talking through this unit. Installing on the sun visor Clamps External microphone Connecting cord Installing on the dashboard Clamps Connecting cord External microphone Tip You can set microphone priority (page 22).