Sony MHC-LX10000 Operating Instructions (MHC-LX10000) - Page 12

3 Press one of DISC 1 ~ 3 buttons or EX-CHANGE/DISC SKIP (or DISC SKIP on the remote) to select a disc. To program all the tracks on a disc at once, proceed to step 5 while "AL" appears in the display. To program all the MP3 audio tracks on an album at once, turn and hold ALBUM +/- clockwise or counterclockwise and release it at the album you want (or press ALBUM +/- on the remote repeatedly until the album you want appears in the display), then proceed to step 5. 4 Turn . > clockwise or counterclockwise (or press -. or >+ on the remote repeatedly) until the track number you want appears in the display. The total playing time flashes in the display. When programming an MP3 audio track, turn and hold ALBUM +/- clockwise or counterclockwise and release it at the album you want (or press ALBUM +/- on the remote repeatedly until the album you want appears in the display), then turn . > clockwise or counterclockwise (or press -. or >+ on the remote repeatedly) until the track number you want appears in the display. Disc tray Track number number Total playing time (including selected track) 6 To program additional discs or tracks. To program Repeat steps Other discs 3 and 5 Other tracks on the 4 and 5 same disc Other tracks on other discs 3 to 5 7 Press nN (or N on the remote). Program Play starts. Other operations To Do this Cancel Program Play When playback is stopped, press PLAY MODE on the remote repeatedly until "PROGRAM" disappear from the display. Clear a track from Press CLEAR on the remote the end of program when playback is stopped. Tips • The program you made remains in the system's memory even after it has been played back. Press nN (or N on the remote) to play back the same program again. • If "--.--" appears instead of the total playing time during programming, this means: - you have programmed a track number which exceeds 20. - the total playing time has exceeded 100 minutes. - you have programmed an MP3 audio track. 5 Press ENTER. The track(s) is(are) programmed. The program step number appears in the display. 12US