Sony MHC-LX10000 Operating Instructions (MHC-LX10000) - Page 25
Changing the spectrum analyzer display, Adjusting the brightness of the display
View all Sony MHC-LX10000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
Changing the spectrum analyzer display 1 Press AMP MENU repeatedly to select "SPECTRUM". The last selected spectrum setting appears in the display. 2 Turn OPERATION DIAL clockwise or counterclockwise to select the setting you want. The display changes as follows: SPECTRUM 1T t SPECTRUM 2 Y SPECTRUM OFF Y SPECTRUM 3 R t SPECTRUM 4 T R 3 Press ENTER. Adjusting the brightness of the display 1 Press AMP MENU repeatedly to select "DIMMER". The last selected dimmer setting appears in the display. 2 Turn OPERATION DIAL clockwise or counterclockwise to select the setting you want. The display changes as follows: t DIMMER OFF y DIMMER 1 T t DIMMER 2* T * DIMMER 2 is the darkest. 3 Press ENTER. Changing the power illuminator Press ILLUMINATION repeatedly to select the power illuminator you want when the system is turned on. Each time you press the button, the power illuminator changes cyclically as follows: PATTERN 1 t PATTERN 2 t PATTERN 3 t PATTERN 4 t PATTERN OFF Notes • When you turn MASTER VOLUME (or press VOLUME +/- on the remote), power illuminator shows the current volume level. • During the demonstration display, you can turn on or off power illuminator by pressing ILLUMINATION. Display 25US