Sony MHC-LX10000 Operating Instructions (MHC-LX10000) - Page 19

Sound Adjustment Adjusting the sound You can reinforce the bass and create a more powerful sound. Press GROOVE repeatedly. Each time you press the button, the display changes cyclically as follows: GROOVE ON* t GROOVE OFF * The volume switches to power mode and the equalizer curve changes. Tips • The default setting is "GROOVE ON". • When "GROOVE ON" is selected, "GROOVE" lights up in the display. Selecting the preset effect Turn OPERATION DIAL clockwise or counterclockwise (or press EQ on the remote repeatedly) to select the preset effect you want. Preset effect options Effect ROCK POP JAZZ DANCE SOUL TECHNO HIP HOP REGGAE SAMBA CLASSICAL FLAT USER EQ 1 USER EQ 2 USER EQ 3 Category Standard music sources Original music source User equalizer setting To cancel the preset effect Turn OPERATION DIAL clockwise or counterclockwise until "FLAT" appears in the display. Adjusting the graphic equalizer or selecting the surround effect You can adjust the sound by raising or lowering the level of specific frequency band, then store up to three user equalizer setting in the memory. 1 Press EQ BAND repeatedly to select a frequency band or surround effect. 2 Turn OPERATION DIAL clockwise or counterclockwise to adjust the level or select surround effect you want. Frequency band Frequency level 3 Repeat step 1 and 2 to adjust the level of other frequency bands. 4 Press ENTER. A user equalizer number flashes in the display. 5 Turn OPERATION DIAL clockwise or counterclockwise to select a user equalizer number (1~3) you want to store the equalizer setting. 6 Press ENTER. This setting is automatically stored as the user equalizer setting you selected in step 5. The previous setting stored at this memory location is erased and replaced by the new setting. Tip If you do not want to store the equalizer setting, select "EXIT?" in step 5. continued 19US Sound Adjustment