Sony MHC-LX10000 Operating Instructions (MHC-LX10000) - Page 21
Singing along, Timer, Falling asleep to music, - Sleep Timer - inputs
View all Sony MHC-LX10000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Timer Singing along You can sing along with any stereo CD or tape. You need to connect an optional microphone. 1 Turn MIC LEVEL to "MIN" to turn down the microphone volume. 2 Connect an optional microphone to the MIC 1 or MIC 2 jack. 3 Start playing the music and adjust the volume. 4 Start singing along with the music and adjust the microphone volume by turning MIC LEVEL. Other operations To Do this Adjust the microphone Turn ECHO LEVEL to echo adjust the echo effect. To cancel the echo effect, turn ECHO LEVEL to "MIN". Tips • You can mix and record sound from microphone after step 2. To record the sound, see "Recording on a tape manually" on page 18. To stop recording, press x. • If acoustic feedback (howling) occurs, move the microphone away from the speakers or change the direction of the microphone. • If you want to record your voice through the microphone only, you can do so by selecting the "CD" function and not playing a disc. • When high level sound signals are input, the system automatically adjusts the recording level to prevent distortion of the recorded sound signal (Auto Level Control function). Timer Falling asleep to music - Sleep Timer You can set the system to turn off at a preset time, so that you can fall asleep to music. Use buttons on the remote for the operation. Press SLEEP repeatedly. Each time you press the button, the minute display (the turn-off time) changes cyclically as follows: AUTO* t 90min t 80min t 70min t ... t 10min t OFF * The system automatically turns off in 100 minutes or after the current disc or tape finishes playing. Other operations To Do this Check the Press SLEEP once. remaining time** Change the time Press SLEEP repeatedly to select to turn off the time you want. Cancel the Sleep Press SLEEP repeatedly until Timer "SLEEP OFF" appears in the display. ** You cannot check the remaining time if you select "AUTO". Notes • During CD Synchro Recording, do not set the Sleep Timer to "AUTO". • When the Sleep Timer is activated, "SLEEP" lights up in the display. Tip You can use the Sleep Timer, even if you have not set the clock. 21US