Sony MHC-LX10000 Operating Instructions (MHC-LX10000) - Page 31
Troubleshooting, Tuner, Tape deck
View all Sony MHC-LX10000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
MP3 audio track cannot be played back. • Recording was not performed according to the ISO 9660 level 1, level 2 or Joliet in the expansion format. • The MP3 audio track does not have the extension ".MP3". • The data is not stored in MP3 format even though it has extension ".MP3". • The MP3 audio tracks in format other than MPEG 1, 2 and 2.5 Audio Layer 3 cannot be played back. • The system can play back to a depth of 8 folders only. • MP3 audio tracks in MP3 PRO format cannot be played back on this system. MP3 audio tracks take longer time to play back than others. • After the system reads all tracks on the discs, playback may take more time than usual if: - the number of albums or tracks on the disc is very large. - the album and track organization structure is very complex. The album title, track title, ID3 tag and the CD-TEXT characters do not appear properly. • Use a disc that conforms with ISO 9660 level 1, level 2 or Joliet in the expansion format. • The ID3 tag is not version 1 or version 2. • The character code that can be displayed by this system are as follow: - Upper cases (A to Z) - Lower cases (a to z) - Numbers (0 to 9) - Symbols Other characters may not be displayed correctly. Tuner There is severe hum or noise. ("TUNED" or "STEREO" flashes in the display) • Set the proper band and frequency (page 13). • Connect the antenna properly (page 7). • Find a place and an orientation that provide good reception, then set up the antenna again. If you cannot obtain good reception, we recommend you connect an external antenna. • The supplied FM lead antenna receives signals along its entire length, so make sure you extend it fully. • Locate the antennas as far away from the speaker cords as possible. • Try turning off surrounding electrical equipment. • Set CD power manage function to "CD POWER OFF" (page 14). A stereo FM program cannot be received in stereo. • Press FM MODE on the remote repeatedly until "MONO" disappears in the display. Tape deck The tape does not record or playback, or there is a decrease in sound level. • The tape heads are dirty (see "Cleaning the tape heads" on page 34). • The record/playback heads are magnetized (see "Demagnetizing the tape heads" on page 34). The tape does not erase completely. • The record/playback heads are magnetized (see "Demagnetizing the tape heads" on page 34). There is excessive wow or flutter, or the sound drops out. • The capstans or pinch rollers are dirty (see "Cleaning the tape heads" on page 34). Noise increases or the high frequencies are erased. • The record/playback heads are magnetized. (see "Demagnetizing the tape heads" on page 34). The tape does not record. • No tape is loaded. Load a tape. • The tab has been removed from the tape. Cover the broken tab with adhesive tape (page 34). • The tape has reeled to the end. Troubleshooting continued 31US