Sony MHC-LX10000 Operating Instructions (MHC-LX10000) - Page 14

Press ENTER., select the preset number you want.

Page 14 highlights

4 Press TUNER MEMORY on the remote. A preset number flashes in the display. The stations are stored from preset number 1. Preset number 5 Turn TUNING +/- clockwise or counterclockwise (or press -. or >+ on the remote repeatedly) to select the preset number you want. 6 Press ENTER. "Complete!" appears in the display. The station is stored. 7 Repeat steps 1 to 6 to store other stations. Other operations To Do this Tune in a station Follow the procedure described with a weak signal in "Manual tuning preset" on page 13. Stop scanning during automatic tuning Press x. Cancel presetting Press TUNER MEMORY on the remote. To improve tuner reception When tuner reception is poor, set the CD power manage function to "CD POWER OFF". The default setting is "CD POWER ON". Use buttons on the unit for the operation. 1 Press CD. 2 Press ?/1 to turn off the system. 3 Press ?/1 while holding x. The system turns on automatically. "CD POWER OFF" appears in the display. To set to "CD POWER ON" Repeat the procedure above and "CD POWER ON" appears in the display. Notes • When "CD POWER OFF" is selected, disc access time is increased. • You cannot change the CD power manage function setting in the Power Saving Mode (page 24). To change the AM tuning interval Use buttons on the unit for the operation. The factory settings for AM tuning interval is 9 kHz (or 10 kHz for some areas). To change the AM tuning interval, select any AM station first, then turn off the system. While holding down ENTER, press ?/1. The system turns on automatically and "AM 10k STEP" or "AM 9k STEP" appears in the display. When you change the interval, all the AM preset stations are erased. To reset the interval, repeat the same procedure. Note You cannot change the AM tuning interval in the Power Saving Mode (page 24). Tips • The preset stations are retained for half a day even if you unplug the power cord or if a power failure occurs. • If you press TUNER/BAND while the system is turned off, the system turns on automatically and "TUNER" is selected as the function. • You can also press FUNCTION on the remote repeatedly to select "TUNER". 14US

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40

14
US
4
Press TUNER MEMORY on the remote.
A preset number flashes in the display.
The stations are stored from preset
number 1.
5
Turn TUNING +/– clockwise or
counterclockwise (or press –
.
or
>
+ on the remote repeatedly) to
select the preset number you want.
6
Press ENTER.
“Complete!” appears in the display. The
station is stored.
7
Repeat steps 1 to 6 to store other
stations.
Other operations
To improve tuner reception
When tuner reception is poor, set the CD power
manage function to “CD POWER OFF”. The
default setting is “CD POWER ON”.
Use buttons on the unit for the operation.
1
Press CD.
2
Press
?/1
to turn off the system.
3
Press
?/1
while holding
x
.
The system turns on automatically. “CD
POWER OFF” appears in the display.
To set to “CD POWER ON”
Repeat the procedure above and “CD POWER
ON” appears in the display.
Notes
When “CD POWER OFF” is selected, disc access
time is increased.
You cannot change the CD power manage function
setting in the Power Saving Mode (page 24).
To change the AM tuning interval
Use buttons on the unit for the operation.
The factory settings for AM tuning interval is
9
kHz (or 10
kHz for some areas). To change the
AM tuning interval, select any AM station first,
then turn off the system. While holding down
ENTER, press
?/1
. The system turns on
automatically and “AM 10k STEP” or
“AM 9k STEP” appears in the display. When
you change the interval, all the AM preset
stations are erased. To reset the interval, repeat
the same procedure.
Note
You cannot change the AM tuning interval in the
Power Saving Mode (page 24).
Tips
The preset stations are retained for half a day even if
you unplug the power cord or if a power failure
occurs.
If you press TUNER/BAND while the system is
turned off, the system turns on automatically and
“TUNER” is selected as the function.
You can also press FUNCTION on the remote
repeatedly to select “TUNER”.
To
Do this
Tune in a station
with a weak signal
Follow the procedure described
in “Manual tuning preset” on
page 13.
Stop scanning
during automatic
tuning
Press
x
.
Cancel presetting
Press TUNER MEMORY on
the remote.
Preset number