Sony MHC-LX10000 Operating Instructions (MHC-LX10000) - Page 32
Messages, operate properly after performing - reset
View all Sony MHC-LX10000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
The system cannot play back the reverse side of the tape in Deck A. • The system only can play back front side of the tape in Deck A. This is not a malfunction. When you turn . > clockwise or counterclockwise (or press -. or >+ on the remote), "Not in Use" flashes in the display. • The system does not has AMS (Automatic Music Sensor) function. This is not a malfunction. If the system still does not operate properly after performing the above measures or other troubles does not described above occur, reset the system as follows: Use buttons on the unit for the operation. 1 Unplug the power cord. 2 Plug the power cord back in. 3 Press ?/1 to turn on the system. 4 Press x, ENTER and ?/1 at the same time. The system is reset to the factory settings. You should set the settings you made, such as the preset stations, clock and timer. Messages One of the following messages may appear or flash in the display during operation. Disc NO STEP You have cleared all the steps you programmed. OVER You have reached the end of the disc while turning and holding m M clockwise (or pressing M on the remote) during playback or pause. No Disc There is no disc on the disc tray. Push STOP! You have pressed PLAY MODE on the remote during playback. Step Full! You tried to program more than 25 steps. Reading The system is reading information of the disc. Some buttons are not available. Tape No Tab You cannot record the tape because the tab has been removed from the tape. No Tape There is no tape in the tape deck. Timer OFF TIME NG! The on time and off time of Play Timer or Timer Recording is same. SET CLOCK! You pressed CLOCK/TIMER SELECT before the clock is set. SET TIMER! You pressed CLOCK/TIMER SELECT before Play Timer or Timer Recording is set. PUSH SELECT! You tried to set the clock or timer during timer operation. Others Not in Use You have pressed a button those operations is not allowed or invalid at that time. 32US