Sony MHC-ZX10 Operating Instructions - Page 14

Listening to the radio

Page 14 highlights

Recording a CD (continued) Listening to the radio To stop recording Press x. To cancel the menu operation Press MODE SELECT. - Preset Tuning Preset radio stations in the tuner's memory first (see "Step 3: Presetting radio stations" on page 8). Tips • If you want to record from the reverse side, press TAPE B n to light its indicator after pressing CD SYNC. • When you record on both sides, be sure to start from the front side. If you start from the reverse side, recording stops at the end of the reverse side. • When you want to reduce the hiss noise in low-level high-frequency signals, do the following procedure after pressing CD SYNC. 1 Press MODE SELECT repeatedly to select "Set Up Mode", then press PUSH ENTER. 2 Move the multi stick toward b or B repeatedly to select "TAPE Set Up ?", then press PUSH ENTER. 3 Move the multi stick toward b or B repeatedly to select "DOLBY NR Set Up ?", then press PUSH ENTER. 4 Move the multi stick toward b or B repeatedly to select "On", then press PUSH ENTER. "DOLBY NR" appears in the display. To return to the original setting, repeat steps 1 through 4 and select "Off" in step 4. Note You cannot listen to other sources while recording. ?/1 (Power) 2 1 m M MODE SELECT VOLUME Multi stick PUSH ENTER TUNER/BAND . > m M V B b v VOL +/- 14

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60

14
VOLUME
MODE
SELECT
m M
Listening to the radio
— Preset Tuning
Preset radio stations in the tuner’s memory first
(see “Step 3: Presetting radio stations” on page 8).
To stop recording
Press
x
.
To cancel the menu operation
Press MODE SELECT.
Tips
If you want to record from the reverse side, press
TAPE B
n
to light its indicator after pressing CD
SYNC.
When you record on both sides, be sure to start
from the front side. If you start from the reverse
side, recording stops at the end of the reverse side.
When you want to reduce the hiss noise in low-level
high-frequency signals, do the following procedure
after pressing CD SYNC.
1
Press MODE SELECT repeatedly to select “Set
Up Mode”, then press PUSH ENTER.
2
Move the multi stick toward
b
or
B
repeatedly
to select “TAPE Set Up ?”, then press PUSH
ENTER.
3
Move the multi stick toward
b
or
B
repeatedly
to select “DOLBY NR Set Up ?”, then press
PUSH ENTER.
4
Move the multi stick toward
b
or
B
repeatedly
to select “On”, then press PUSH ENTER.
“DOLBY NR” appears in the display.
To return to the original setting, repeat steps 1
through 4 and select “Off” in step 4.
Note
You cannot listen to other sources while recording.
?/1
(Power)
Recording a CD (continued)
1
2
Multi stick
PUSH ENTER
V
v
B
b
m M
VOL +/–
. >
TUNER/BAND