Sony MHC-ZX10 Operating Instructions - Page 7
Getting Started, To cancel the menu operation, To change the time, Move the multi stick toward - manual
View all Sony MHC-ZX10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
Getting Started 3 Move the multi stick toward v or V repeatedly to set the hour. 4 Move the multi stick toward B. The minute indication flashes. 5 Move the multi stick toward v or V repeatedly to set the minute. 6 Press PUSH ENTER. To cancel the menu operation Press MODE SELECT. Tips • Refer to the illustration to use the multi stick. Place your finger on the center of the multi stick and move in the direction you want (up/down or left/ right shown v/V or b/B in this manual). Up (v) Left (b) PUSH ENTER Right (B) Down (V) • If you've made a mistake, start over from step 1. To change the time The previous explanation shows you how to set the time while the power is off. To change the time while the power is on, do the following: 1 Press MODE SELECT repeatedly to select "Set Up Mode", then press PUSH ENTER. 2 Move the multi stick toward b or B repeatedly to select "Timer Set Up ?", then press PUSH ENTER. 3 Move the multi stick toward b or B repeatedly to select "Clock Set ?", then press PUSH ENTER. 4 Perform steps 3 through 6 on the left. Note The clock settings are canceled when you disconnect the power cord or if a power failure occurs. 7