Sony MHC-ZX10 Operating Instructions - Page 17
Playing a tape
View all Sony MHC-ZX10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Basic Operations Tips • If you want to record from the reverse side, press TAPE B n to light its indicator after pressing REC PAUSE/START in step 4. • When you record on both sides, be sure to start from the front side. If you start from the reverse side, recording stops at the end of the reverse side. • To record non-preset stations, use m and M in step 2 to tune in the desired station manually. • When you want to reduce the hiss noise in lowlevel high-frequency signals, do the following procedure after pressing REC PAUSE/START in step 4. 1 Press MODE SELECT repeatedly to select "Set Up Mode", then press PUSH ENTER. 2 Move the multi stick toward b or B repeatedly to select "TAPE Set Up ?", then press PUSH ENTER. 3 Move the multi stick toward b or B repeatedly to select "DOLBY NR Set Up ?", then press PUSH ENTER. 4 Move the multi stick toward b or B repeatedly to select "On", then press PUSH ENTER. "DOLBY NR" appears in the display. To return to the original setting, repeat steps 1 tthrough 4 and select "Off" in step 4. • If noise is heard while recording from the radio, move the respective antenna to reduce the noise. Playing a tape You can use any type of tape, TYPE I (normal), TYPE II (CrO2) or TYPE IV (metal) , since the deck automatically detects the tape type. You can also use . and > to quickly search for songs you want to hear. ?/1 2 (Power) 7 3 Multi stick x PUSH ENTER . > 1 VOLUME m M V B b v x . > m M TAPE A N TAPE B N MODE SELECT ENTER VOL +/- B/b continued 17