Sony MHC-ZX10 Operating Instructions - Page 53
Specifications - mini stereo
View all Sony MHC-ZX10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
Specifications Amplifier section AUDIO POWER SPECIFICATIONS: (U.S.A. model only) POWER OUTPUT AND TOTAL HARMONIC DISTORTION: with 8 ohm loads both channels driven, from 120- 10,000 Hz; rates 110 watts per channel minimum RMS power, with no more than 10 % total harmonic distortion from 250 milliwatts to rated output. Total harmonics distortion Less than 0.07% (8 ohms at 1 kHz, 60 W) Canadian model: Continuous RMS power output (reference) 100 + 100 watts (8 ohms at 1 kHz, 10% THD) Total harmonics distortion Less than 0.07% (8 ohms at 1 kHz, 60 W) European model: DIN power output (rated) 80 + 80 watts (8 ohms at 1 kHz, DIN) Continuous RMS power output (reference) 100 + 100 watts (8 ohms at 1 kHz, 10% THD) Music power output (reference) 170 + 170 watts (8 ohms at 1 kHz, 10% THD) Inputs VIDEO (AUDIO) IN: (phono jacks) MD IN: (phono jacks) voltage 250 mV, impedance 47 kilohms voltage 450 mV, impedance 47 kilohms Outputs MD OUT: voltage 250 mV (phono jacks) impedance 1 kilohms PHONES: accepts headphones of (stereo mini jack) 8 ohms or more FRONT SPEAKER: accepts impedance of 8 to 16 ohms SURROUND SPEAKER: accepts impedance of 16 ohms SUPER WOOFER: Voltage 1 V, impedance 1 kilohms CD player section System Compact disc and digital audio system Laser Semiconductor laser (λ=780nm) Emission duration: continuous Laser output Max. 44.6 µW* *This output is the value measured at a distance of 200 mm from the objective lens surface on the Optical Pick-up Block with 7 mm aperture. Wavelength 780 - 790 nm Frequency response 2 Hz - 20 kHz (±0.5 dB) Signal-to-noise ratio More than 90 dB Dynamic range More than 90 dB CD OPTICAL DIGITAL OUT (Square optical connector jack, rear panel) Wavelength 660 nm Output Level -18 dBm Tape player section Recording system Frequency response (DOLBY NR OFF) Wow and flutter 4-track 2-channel stereo 40 - 13,000 Hz (±3 dB), using Sony TYPE I cassette 40 - 14,000 Hz (±3 dB), using Sony TYPE II cassette ±0.15% W.Peak (IEC) 0.1% W.RMS (NAB) ±0.2% W.Peak (DIN) Tuner section FM stereo, FM/AM superheterodyne tuner FM tuner section Tuning range North American model: 87.5 - 108.0 MHz (100 kHz step) Other models: 87.5 - 108.0 MHz (50 kHz step) Antenna FM lead antenna Antenna terminals 75 ohm unbalanced Intermediate frequency 10.7 MHz AM tuner section Tuning range North American model: 530 - 1,710 kHz (with the interval set at 10 kHz) 531 - 1,710 kHz (with the interval set at 9 kHz) European model: 531 - 1,602 kHz (with the interval set at 9 kHz) Antenna AM loop antenna Antenna terminals External antenna terminal Intermediate frequency 450 kHz continued Additional Information 53