Sony MHC-ZX10 Operating Instructions - Page 15
Basic Operations, To listen to non-preset radio, stations, Press TUNER/BAND repeatedly
View all Sony MHC-ZX10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Basic Operations 1 Press TUNER/BAND repeatedly to select FM or AM. 2 Press . or > repeatedly to tune in the desired preset station. Preset number* STEREO Frequency * When only one station is preset, "ONE PRESET" appears in the display. To Do this Turn off the radio Press ?/1. Adjust the volume Turn VOLUME (or press VOL +/- on the remote). To listen to non-preset radio stations Use manual or automatic tuning in step 2. For manual tuning, press m or M repeatedly. For automatic tuning, press and hold m or M. Tips • Pressing TUNER/BAND when the power is off automatically turns the power on and tunes to the last received station (One Touch Play). When the system is in the Power Saving Mode, the One Touch Play function does not work. • You can switch from another source to the radio just by pressing TUNER/BAND (Automatic Source Selection). • When an FM program is noisy, do the following procedure: 1 Press MODE SELECT repeatedly to select "Set Up Mode", then press PUSH ENTER. 2 Move the multi stick toward b or B repeatedly to select "TUNER Set Up ?", then press PUSH ENTER. 3 Move the multi stick toward b or B repeatedly to select "Stereo Mono ?", then press PUSH ENTER. 4 Move the multi stick toward b or B repeatedly to select "Mono", then press PUSH ENTER. "Mono" appears in the display. There will be no stereo effect, but the reception will improve. To restore the stereo effect, repeat steps 1 through 4 and select "Stereo" in step 4. • To improve broadcast reception, reorient the respective antenna. 15