Sony MSAC-FD2M Operating Instructions - Page 23

Troubleshooting Check the items listed below before calling for service. If there is still a problem after making these checks, call your Sony dealer or local authorized Sony Service facility. Symptom Cannot install Cannot access "Memory Stick" Power shuts off automatically [MSAC-FD1 Utility] will not start. (For Macintosh) File list menu fails to appear when MSACFD2M is inserted into drive. (For Macintosh) Remedy •CD-ROM not inserted in drive. t Insert CD-ROM provided into the drive. •Installation file name is wrong. (For Windows) t See Operating Instructions. (p. 7) •Battery charge is low or batteries have not been inserted into unit. t Replace the two batteries with new ones. (Replace both batteries at the same time.) •Batteries inserted incorrectly. t See Operating Instructions and install batteries correctly. (p. 5) If the adaptor is not used for approx. five minutes, it goes automatically into sleep mode to conserve battery power. The adaptor cannot be accessed when it is in sleep mode. To use the adaptor again, remove it and then reinsert. If the adaptor is still in sleep mode, leave the adaptor for a while before reinserting it. •File Exchange is . t Change File Exchange to . (p. 15) •MSAC-FD2M has been inserted in the floppy disk drive without starting up [MSAC-FD1 Utility]. t Start up [MSAC-FD1 Utility] and then insert MSAC-FD2M. Additional Information 23-GB