Sony MZ-R501 Operating Instructions - Page 19

Recording without overwriting existing material If you wish to avoid overwriting the current contents of an MD, do the following procedure. All new material will then be recorded from the end of the current contents. SELECT >/. Adding track marks automatically at specified intervals (Auto Time Stamp) Use this feature to add track marks automatically at specified intervals when recording through the analog input connector. SELECT >/. MENU/ENTER 1 While the recorder is stopped, press MENU/ENTER. 2 Press SELECT >/. repeatedly until "R-Posi" flashes in the display, and then press MENU/ENTER. 3 Press SELECT >/. repeatedly until "Fr End" flashes in the display, and then press MENU/ENTER. To start recording over the current contents Select "FrHere" in step 3. Notes • If you start recording while the recorder is in play-pause mode, the recording will begin from the point at which is paused. • The setting will remain even after the power is turned off. MENU/ENTER 1 While the recorder is recording or in recording pause, press MENU/ ENTER. 2 Press SELECT >/. repeatedly until "TimeMK" flashes in the display, and then press MENU/ ENTER. 3 Press SELECT >/. repeatedly until the desired time interval flashes in the display. Select one of the following intervals. Display Time OFF - 5 min Approx. 5 min. 10 min Approx. 10 min. 15 min Approx. 15 min. 4 Press MENU/ENTER. To cancel Auto Time Stamp Select "OFF" in step 3, and then press MENU/ENTER, or stop recording. 19