Sony MZ-R501 Operating Instructions - Page 27

Press To END SEARCH/ VOL - Delete a letter and move back all following letters to the left pressing both buttons together. x Cancel labeling. 4 Repeat step 3 and enter all characters of the label name. 5 Press MENU/ENTER for 2 seconds or more. The track or disc is labeled. Labeling a track during playback 1 Insert a disc and play the track you want to label. 2 Press MENU/ENTER, press SELECT >/. repeatedly until "EDIT" flashes in the display, and then press MENU/ENTER again. " " and "Name" flash in the display. 3 Press MENU/ENTER. The track is ready to be labeled. 4 Follow steps 3 to 5 of "Labeling a disc during stop". Labeling a track or a disc during recording 1 While recording, press MENU/ ENTER, press SELECT >/. repeatedly until "EDIT" flashes in the display, and then press MENU/ ENTER again. " " and "Name" flash in the display. 2 To label a track, press MENU/ ENTER while " " and "Name" are flashing. To label a disc, press SELECT >/ . repeatedly until " " and "Name" flash in the display. The track or disc is ready to be labeled. 3 Follow steps 3 to 5 of "Labeling a disc during stop". To cancel labeling Press x. Notes • When the recording is stopped while labeling a track or a disc during recording, or when the recording moves on to the next track while labeling a track, the input at that point is entered automatically. • "LP:" has automatically been added at the beginning of track names for tracks recorded in LP2 stereo or LP4 stereo. Relabeling recordings Follow the steps corresponding to the labeling method until the disc or track is ready to be labeled. Enter a new character over the one you want to change, then press MENU/ENTER. Notes • You cannot relabel premastered MDs or label MDs that have not been recorded. • The recorder is able to display, but cannot label using Japanese "Katakana" characters. • The recorder cannot rewrite a disc or track name of more than 200 letters that was created by another device. 27