Sony MZ-R501 Operating Instructions - Page 25

3 Press MENU/ENTER. The display changes as follows. A B A B Elapsed time Track number Remaining time of Track name the current track Remaining time after the current location Disc name Note Items may appear differently depending on the recorder's operating status or the recorder settings. z If you want to check the remaining time or the recording position while recording or in stop mode, see page 21. Connecting to a stereo system Connect the i jack of the recorder to the LINE IN jacks of an amplifier or a recorder with a line cable (not supplied). The output is analog. The recorder plays the MD digitally and sends analog signals to the externally connected equipment. Portable DAT recorder, etc. Stereo system, etc. to LINE IN Stereo mini-plug 2 phono plugs RK-G136 (not supplied) L (white) R (red) RK-G129 (not supplied) Locking the controls (HOLD) To prevent the buttons from being accidentally operated when you carry the recorder, use this function. HOLD 1 Slide HOLD in the direction of the SELECT .. To unlock the controls Slide HOLD in the opposite direction of the arrow. to i 1 Press N to start playing. Notes • Even when connecting to the externally connected equipment, the Mega Bass function is operative. If you do not want the effect of the Mega Bass function on your recording or the output from the externally connected equipment, set "BASS" to "OFF" (page 23). • When recording to an externally connected equipment, press VOL +/- repeatedly to adjust the volume level until "VOL 27" appears in the display, which is optimum for recording to an externally connected equipment. 25