Sony MZ-R501 Operating Instructions - Page 34
Symptom, Cause/Solution, Set AVLS
View all Sony MZ-R501 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
Symptom There is no recording on the MD after a recording operation. The lid does not open. Volume cannot be turned up. No sound comes through the headphones/ earphones. An MD is not played from the first track. Playback sound skips. Sound has a lot of static. Cannot find the track marks. The disc cannot edit on other component. Momentary noise is heard. Cause/Solution • The AC power adaptor was unplugged or a power outage occurred during recording. • The battery have been exhausted. , Replace the exhausted battery with new ones. • AVLS is on. , Set AVLS to "OFF" (page 24). • The headphones/earphones plug is not firmly connected. , Plug in the plug of the headphones/earphones firmly to i. • Volume is too low. , Adjust the volume by pressing VOL +/-. • Disc playing stopped before it came to the last track. , Press . repeatedly or open and close the lid once to go back to the beginning of the disc, and restart playing after checking the track number in the display. • The recorder is placed where it receives continuous vibration. , Put the recorder on a stable place. • A very short track may cause sound to skip. • Strong magnetism from a television or such device is interfering with operation. , Move the recorder away from the source of strong magnetism. • You pressed X after pressing . or >. , Press X before or pressing . or > (page 29). • The component does not support LP2 stereo and LP4 stereo mode. , Edit on other component that support LP2 stereo and LP4 stereo mode. • Due to the special digital audio compression technology used in LP4 stereo mode, momentary noise may occur on very rare occasions with certain sound sources. , Record in normal stereo or LP2 stereo mode. 34