Home » Sony Manuals » Video Conferencing » Sony PCS-G50 » Manual Viewer

Sony PCS-G50 System Integration Guide - Page 10

When used in ISDN with one Camera and one Monitor, damage the camera unit - software

Add to My Manuals
Save this manual to your list of manuals

Page 10 highlights

2. When used in ISDN (with one Camera and one Monitor) m . Do not connect/disconnect the camera cable or the interface cable with the power on. Doing so may damage the camera unit, communication terminal or ISDN unit. . Used with an ISDN unit for the first time, the communication terminal may automatically upgrade the software of the ISDN unit. While the upgrading message is displayed on the monitor screen, be sure not to turn off the communication terminal. Doing so may cause malfunction of the system. PCSA-CG70/CG70P Camera unit ISDN unit ** PCSA-B384S ISDN unit ** TERMINAL VISCA OUT to TERMINAL to TERMINAL Interface cable (supplied with ISDN UNIT) Camera cable * PCS-PG70/PG70P Communication to MAIN terminal CAMERA to ISDN UNIT MCU VIDEO OUT 1 2 DC 19.5V IR OUT 1 2 3 4 5 AUX CONTROL CTRL-S AUDIO OUT AUDIO IN (MIXED) AUX LINE MIC (PLUG IN POWER) 1 2 MAIN CAMERA AUX IN 1 2 AUX MONITOR VIDEO OUT EC-MIC 1 2 RGB OUT WHITE 100BASE-TX/ BOARD 10BASE-T SUB CAMERA AUX IN DSB ISDN UNIT to ISDN 1-3 PCSA-B768S ISDN unit ** to ISDN 1-6 PCSA-PRI ISDN unit ** to ISDN PRI ISDN modular cable ** to AUDIO OUT to VIDEO OUT MONITOR 1 PCS-AC19V6 AC adaptor Power cord * to DC19.5V to a wall outlet Audio cable * S-video cable * to S-video input TV monitor ** * supplied ** not supplied to audio input to a wall outlet m . If the system uses only one camera, be sure to connect it to the MAIN CAMERA connector. . The AUDIO OUT (MIXED) jack is used to make an audio recording of a conference. This is not used during regular conferences. . PCS-B384, PCS-B768 or PCSA-PRI is available for an ISDN unit. 1-6 PCS-G70/G70P/G50/G50P

Section	Page
Cover	1
Table of Contents	3
1. Installation	5
1-1. Caution on Installation	5
1-1-1. Videoconferencing Room Layout	5
1-1-2. Operating Environment	7
1-2. Flowchart of Installation	8
1-3. System Connections	9
1-3-1. PCS-G70/G70P	9
1-3-2. PCS-G50/G50P	11
1-4. Initialization	13
1-4-1. Inserting Batteries into the Remote Commander	13
1-4-2. Turning On/Off the TV Monitor Together with the Communication Terminal	14
1-4-3. When the Power is First Turned On after Installation	15
1-4-4. Adjust the Volume of TV Monitor	20
1-5. System Setting	21
1-5-1. Menu Configuration	21
1-5-2. System Setting Table	22
1-6. Flowchart of Opening Test	44
1-6-1. Dialing Procedure of ISDN	45
1-6-2. Answering Procedure of ISDN	46
1-6-3. Dialing Procedure of LAN	47
1-6-4. Answering Procedure of LAN	48
1-7. Conducting a Videoconference Using the Dual Video Function	49
1-7-1. System Configuration Using 2 Cameras and 3 Monitors	49
1-7-2. Activating the Dual Video Function	50
1-8. Connecting Four Camera Units (PCS-G70/G70P)	51
1-9. Connecting Two Camera Units (PCS-G50/G50P)	53
1-10. Multipoint Videoconference using 4CIF Mode	54
1-10-1. Relation between 4CIF broadcast mode and video format	54
1-10-2. Pre-confirmation items	56
1-10-3. Setting	56
1-11. Connecting to Network Cameras	58
1-11-1. Overview	58
1-11-2. User Authority	60
1-11-3. Setting Procedures in PCS Integration	64
1-11-4. Setting Network Camera Password	65
1-11-5. Setting Network Camera Setting	65
1-11-6. Registering/Editing Network Camera List	66
1-11-7. Connecting Network Cameras	68
1-11-8. Setting Network Camera itself	69
1-11-9. Communication Mode for Multipoint Connection	73
1-11-10. Web Control Function	83
2. Maintenance	85
2-1. Confirmation Procedure of Local Terminal Operation Using Self-Loop	85
2-2. LAN Communication Test Using Ping	85
2-3. Failure Analysis	86
2-4. How to Take Log	88
2-5. Updating of Software	98
2-5-1. Updating Using Memory Stick	98
2-5-2. Upgrading using FTP software	99
2-6. Service Mode	100
3. Technical Data	103
3-1. Communication Terminal Port Number Used	103
3-1-1. Without H.323MCU Option (Default)	103
3-1-2. Without H.323MCU Option (Custom: When TCP port number is set to 3000 and UDP port number is set to 3100)	103
3-1-3. With H.323MCU Option (Default)	104
3-1-4. With H.323MCU Option (Custom: When TCP port number is set to 3000 and when UDP port number is set to 3100)	104
3-2. Setting of Communication Terminal and HUB	105
3-3. Audio and Video Input/Output Characteristics of Communication Terminal	106
3-3-1. Audio Input/Output Characteristics of PCS-PG70/PG70P/PG50/PG50P	106
3-3-2. Video Input/Output Characteristics of PCS-PG70/PG70P/PG50/PG50P	106
3-4. Audio Selection List of PCS-G70/G70P/G50/G50P	107
3-5. Displayed Window during Multipoint Connection of PCS-G70/G70P/G50/G50P	108
3-5-1. Displayed Picture at Each Point in Voice Activate Mode	108
3-5-2. Displayed Picture at Each Point in Broadcast Mode with Full Screen Mode	109
3-5-3. Displayed Picture at Each Point in Broadcast Mode with Split Window Mode	110
3-6. Display Transition List of PCS-G70/G70P/G50/G50P	113