Sony PCS-G50 System Integration Guide - Page 77
Connection Example, Note that Rate in the status menu includes the audio transfer rate.
View all Sony PCS-G50 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
Connection Example n The determined bit rate and frame rate of the network cameras can be checked through the "Rate" and "Frame Rate" items in the PCS status menu (Page 1/3). Note that "Rate" in the status menu includes the audio transfer rate. Example 1-a-1(1) Main Terminal Description Camera 1 1024 kbps/15 fps Camera 2 512 kbps/15 fps 1-a-1(2) When the sum of the network camera bit rates (1024 kbps + 512 kbps) does not exceed the main PCS's LAN bandwidth (4 Mbps) and when each setting on the main PCS's network camera page is set to a setting other than "Auto," cameras 1 and 2 are connected using the PCS setting values. In the example above, camera 1 is configured via the network camera settings to have a 1024 kbps bit rate, but the rate is automatically changed to 512 kbps when connected to the PCS. Main Terminal Camera 1 1024 kbps/30 fps JPEG/VGA Camera 2 512 kbps/15 fps MPEG4/QQVGA When the sum of the network camera bit rates (1024 kbps + 512 kbps) does not exceed the main PCS's LAN bandwidth (4 Mbps) and when each setting on the main PCS's network camera page is set to "Auto," cameras 1 and 2 operate using the network camera setting values. Communication mode settings not supported by PCS, however, are changed automatically. In the example above, camera 1 is configured as JPEG/VGA in the network camera settings. When it is connected to the PCS, it is automatically changed to H.264/QVGA. However, a mixture of different bit rates, frame rates, modes (H.264 or MPEG4), and image sizes (QVGA or QQVGA) can be used. Setting Example/ Determined Communication Mode Settings on Main Terminal (PCS) Communication Setup: LAN Bandwidth: 4 Mbps General Setup/Network Camera: Bit Rate: 512 kbps Frame Rate: 15 fps Mode: H.264 Image Size: QVGA Determined Com. Mode on Sub-terminal Camera 1 Each camera is connected using the values (bit rate, frame rate, mode and image size) specified by main terminal. Camera 2 Settings on Main Terminal (PCS) Communication Setup: LAN Bandwidth: 4 Mbps General Setup/Network Camera: Bit Rate: Auto Frame Rate: Auto Mode: Auto Image Size: Auto Determined Com. Mode on Sub-terminal Camera 1 Bit Rate: 1024 kbps (No change) Frame Rate: 30 fps (No change) Mode: Changes from JPEG to H.264 Image Size: Changes from VGA to QVGA Camera 2 Bit Rate: 512 kbps Frame Rate: 15 fps Mode: MPEG4 Image Size: QQVGA (No change for any item) PCS-G70/G70P/G50/G50P 1-73