Sony PCS-G50 System Integration Guide - Page 18
DHCP Mode, Host Name, IP Address, Network Mask, Gateway Address - pcs g50p manual
View all Sony PCS-G50 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
11. Set the following items on LAN. LAN Setup Wizard DHCP Mode Off Host Name IP Address Network Mask Gateway Address DNS Address Previous Next Cancel DHCP Mode: Sets DHCP (Dynamic Host Configuration Protocol). AUTO: Automatically assigns an IP address, net- work mask, gateway address, and DNS address. OFF: Deactivates DHCP. In this case set an IP address, network mask, gateway address, and DNS address manually. Host Name: Enter a host name. IP Address: Enter an IP address for the communication terminal. Network Mask: Enter a network mask. Gateway Address: Enter a default gateway address. DNS Address: Enter a DNS (Domain Name System) server address. m . If the "DHCP Mode" has been set to "AUTO", the automatically assigned IP address can be confirmed in the launcher menu or information menu. . If you do not know how to setup the LAN, check with a network administrator for connectingnetwork. 12. Select "Next" using the , , , or button on the remote commander, then press the PUSH ENTER button. A confirmation message is then displayed. m . To stop the setting Select "Cancel" using the , , , or button on the remote commander, then press the PUSH ENTER button. . To return to the preceding wizard Select "Return" using the , , , or button on the remote commander, then press the PUSH ENTER button. 13. Select "Save" using the , , , or button on the remote commander, then press the PUSH ENTER button. Save Previous Cancel The settings are saved, and then the launcher menu will be displayed. Tokyo New York Paris AUTO IP: 012.345.678.678 ISDN: 012345678956789 Enter the remote party number. Phone Book Detail Dial History Menu Information Dial Launcher menu n Used with an optional device especially designed for use with this system, such as the data solution box or ISDN unit, for the first time, the communication terminal may automatically upgrade the software of the connected device. While the upgrading message is displayed on the monitor screen, be sure not to turn off the communication terminal. Doing so may cause malfunction of the system. System malfunction may also occur when a system power-off has been caused by an accidental problem such as a power interruption during upgrading. If connection of the data solution box or ISDN unit to the communication terminal is not re-established even after the system power is recovered, consult a Sony dealer. 1-14 PCS-G70/G70P/G50/G50P