Sony PCS-G50 System Integration Guide - Page 22

1-18

PCS-G70/G70P/G50/G50P

1-5-2.

System Setting Table

1.

PCS-G70/G70P

Menu

Page

Item

Description

Default

Dial Setup

1/2

Line I/F

Select line interface [IP, SIP, ISDN, or ISDN (Telephone)]

IP

used.

Bonding

Select bonding mode in which remaining lines can also be

Auto

connected by only dialing one line when multiple ISDN lines

are used. Select “On” when connecting a line in the bonding

mode. Select “Auto” when automatically adjusting a line to

remote party.

Telephone Mode

Select audio compression system during voice meeting.

Auto

More Options Enable

Set to “On” when you want to set items in the dial setup

Off

menu for each dial list. Set to “Off” when you do not.

User Name Input

Set to “On” when recording user name in communication log

Off

before communication. Set to “Off” when not recording it.

2/2

Prefix

Set prefix number used when connecting using an ISDN line.

Prefix-None

Prefix-A

Set ISDN prefix (dial number).

Blank

Prefix-B

Prefix-C

Select LAN Prefix

Set “Enabled” when using prefix for connection using a LAN

Disabled

line. Set “Disabled” when not using it.

LAN Prefix

Set LAN prefix (dial number).

Blank

Answer Setup

1/1

Auto Answer

Select “On” to connect automatically according to a call.

On

Select “Off” to confirm connection.

ISDN MSN

Select “On” when using multiple subscriber numbers during

Off

connection (answering) with an ISDN line. Select “Off” when

not using them.

Mic on Answer

Select “On” to enable microphone when answering a call.

On

Select “Off” to disable it.

Reject Answer

*

1

Select “On” to reject connection when a call is received

Off

during conference. Select “Off” to make connection.

Communication

1/5

Individual Setting

Select “On” to set communication mode individually for

Off

Setup

dialing, answering, and for multipoint

*

1

. Select “Off” to set it

collectively.

Number of Lines

Select the number of ISDN lines used for ISDN

30B

communication from 1B (64 K) up to 30B (1920 K).

LAN Bandwidth

Select bandwidth (bit rate) when communicating via a LAN

1024 Kbps

line.

2/5

Video Mode

Select video coding format.

Auto

Interlace Mode

*

2

Select “On” when using interlace SIF mode. Select “Off”

Auto

when not using it.

4CIF Mode

*

2

Select “On” when using 4CIF mode. Select “Off” when not

Auto

using it.

Video Frame

Select maximum number of video transmission frames (15

Auto

fps or 30 fps).

Audio Mode

Select audio coding format.

Auto

Restrict

Select transmission rate (Auto or 56K) when connecting

Auto

using an ISDN line. Two rates (64 Kbps and 56 Kbps) are

used in some countries (USA, etc.) and regions.

*

1: Setting is added when H.320 or H.323 MCU Software is installed.

(Continued)

*

2: These items are automatically set when the Video Mode setting is set to “Auto”.

Section	Page
Cover	1
Table of Contents	3
1. Installation	5
1-1. Caution on Installation	5
1-1-1. Videoconferencing Room Layout	5
1-1-2. Operating Environment	7
1-2. Flowchart of Installation	8
1-3. System Connections	9
1-3-1. PCS-G70/G70P	9
1-3-2. PCS-G50/G50P	11
1-4. Initialization	13
1-4-1. Inserting Batteries into the Remote Commander	13
1-4-2. Turning On/Off the TV Monitor Together with the Communication Terminal	14
1-4-3. When the Power is First Turned On after Installation	15
1-4-4. Adjust the Volume of TV Monitor	20
1-5. System Setting	21
1-5-1. Menu Configuration	21
1-5-2. System Setting Table	22
1-6. Flowchart of Opening Test	44
1-6-1. Dialing Procedure of ISDN	45
1-6-2. Answering Procedure of ISDN	46
1-6-3. Dialing Procedure of LAN	47
1-6-4. Answering Procedure of LAN	48
1-7. Conducting a Videoconference Using the Dual Video Function	49
1-7-1. System Configuration Using 2 Cameras and 3 Monitors	49
1-7-2. Activating the Dual Video Function	50
1-8. Connecting Four Camera Units (PCS-G70/G70P)	51
1-9. Connecting Two Camera Units (PCS-G50/G50P)	53
1-10. Multipoint Videoconference using 4CIF Mode	54
1-10-1. Relation between 4CIF broadcast mode and video format	54
1-10-2. Pre-confirmation items	56
1-10-3. Setting	56
1-11. Connecting to Network Cameras	58
1-11-1. Overview	58
1-11-2. User Authority	60
1-11-3. Setting Procedures in PCS Integration	64
1-11-4. Setting Network Camera Password	65
1-11-5. Setting Network Camera Setting	65
1-11-6. Registering/Editing Network Camera List	66
1-11-7. Connecting Network Cameras	68
1-11-8. Setting Network Camera itself	69
1-11-9. Communication Mode for Multipoint Connection	73
1-11-10. Web Control Function	83
2. Maintenance	85
2-1. Confirmation Procedure of Local Terminal Operation Using Self-Loop	85
2-2. LAN Communication Test Using Ping	85
2-3. Failure Analysis	86
2-4. How to Take Log	88
2-5. Updating of Software	98
2-5-1. Updating Using Memory Stick	98
2-5-2. Upgrading using FTP software	99
2-6. Service Mode	100
3. Technical Data	103
3-1. Communication Terminal Port Number Used	103
3-1-1. Without H.323MCU Option (Default)	103
3-1-2. Without H.323MCU Option (Custom: When TCP port number is set to 3000 and UDP port number is set to 3100)	103
3-1-3. With H.323MCU Option (Default)	104
3-1-4. With H.323MCU Option (Custom: When TCP port number is set to 3000 and when UDP port number is set to 3100)	104
3-2. Setting of Communication Terminal and HUB	105
3-3. Audio and Video Input/Output Characteristics of Communication Terminal	106
3-3-1. Audio Input/Output Characteristics of PCS-PG70/PG70P/PG50/PG50P	106
3-3-2. Video Input/Output Characteristics of PCS-PG70/PG70P/PG50/PG50P	106
3-4. Audio Selection List of PCS-G70/G70P/G50/G50P	107
3-5. Displayed Window during Multipoint Connection of PCS-G70/G70P/G50/G50P	108
3-5-1. Displayed Picture at Each Point in Voice Activate Mode	108
3-5-2. Displayed Picture at Each Point in Broadcast Mode with Full Screen Mode	109
3-5-3. Displayed Picture at Each Point in Broadcast Mode with Split Window Mode	110
3-6. Display Transition List of PCS-G70/G70P/G50/G50P	113

Sony PCS-G50 System Integration Guide - Page 22

System Setting Table - multipoint

Page 22 highlights