Sony PCS-G50 System Integration Guide - Page 41

1-37

PCS-G70/G70P/G50/G50P

(PCS-G50/G50P)

Menu

Page

Item 1

Page

Item 2

Description

Default

LAN Setup

1/1

PPPoE

1/2

PPPoE

Select PPPoE termination On/Off using this unit.

Off

PPPoE User

Enter PPPoE connection user name (account) acquired

Blank

Name

from provider.

PPPoE

Enter PPPoE connection password acquired from provider.

Blank

Password

2/2

Fixed IP for

Select “On” when fixed IP address for PPPoE connection is

Off

PPPoE

acquired from provider. Select “Off” when automatically

acquiring it for each session.

Fixed IP Address

Enter fixed IP address acquired from provider when “Fixed

Blank

for PPPoE

IP for PPPoE” is “On”.

PPPoE DNS

Select “Obtain automatically” when acquiring IP address of

Obtain

DNS server from the server during PPPoE connection.

Automatically

Select “Specify” when fixed IP address exists.

Primary DNS

Enter IP address of primary DNS server when “PPPoE DNS”

Blank

is “Specify”.

Secondary

Enter IP address of secondary DNS server when “PPPoE

Blank

DNS

DNS” is “Specify”.

1/1

NAT/Port/

1/2

NAT Mode

Select “On” when connecting this unit to local network using

Off

Firewall

NAT (Network Address Translation). Select “Off” when not

connecting it.

NAT Address

Set IP address on the global side that NAT uses.

Blank

Port Number

Select whether to fix TCP port number and UDP port number.

Default value

Used

Custom:

The port number that the user sets is used.

Default:

Default port number is used.

TCP port number 2253 and UDP port number 49152 are set.

TCP Port

Set TCP port number when “Port Number Used” is “Custom”.

2253

Number

UDP Port

Set UDP port number when “Port Number Used” is “Custom”.

49152

Number

2/2

NAT/Firewall

Select “On” when traversing firewalls to conduct conferences

Off

Traversal

with terminals on other networks using H.460 and select “Off”

when not traversing firewalls.

1/1

QoS

1/1

Hybrid

Select “On” when automatically switching FEC function,

On

packet resend request function, and adaptive rate control

function according to network status. Select “Off” when

not switching them.

Forward Error

If the received packets contain errors, select “On” when

On

Correction

correcting errors on the receiving side and select “Off” when

not correcting errors.

Packet

Select “On” when making a resend request due to packet

On

Resend

loss when “Hybrid” is set to “Off”. Select “Off” when not

Request

making it.

Adaptive Rate

Can be set when “Packet resend request” is set to

On

Control

OFF.

Select “ON” when you always optimize the LAN band-

width.

Select “OFF” when you do not optimize it.

(Continued)

Section	Page
Cover	1
Table of Contents	3
1. Installation	5
1-1. Caution on Installation	5
1-1-1. Videoconferencing Room Layout	5
1-1-2. Operating Environment	7
1-2. Flowchart of Installation	8
1-3. System Connections	9
1-3-1. PCS-G70/G70P	9
1-3-2. PCS-G50/G50P	11
1-4. Initialization	13
1-4-1. Inserting Batteries into the Remote Commander	13
1-4-2. Turning On/Off the TV Monitor Together with the Communication Terminal	14
1-4-3. When the Power is First Turned On after Installation	15
1-4-4. Adjust the Volume of TV Monitor	20
1-5. System Setting	21
1-5-1. Menu Configuration	21
1-5-2. System Setting Table	22
1-6. Flowchart of Opening Test	44
1-6-1. Dialing Procedure of ISDN	45
1-6-2. Answering Procedure of ISDN	46
1-6-3. Dialing Procedure of LAN	47
1-6-4. Answering Procedure of LAN	48
1-7. Conducting a Videoconference Using the Dual Video Function	49
1-7-1. System Configuration Using 2 Cameras and 3 Monitors	49
1-7-2. Activating the Dual Video Function	50
1-8. Connecting Four Camera Units (PCS-G70/G70P)	51
1-9. Connecting Two Camera Units (PCS-G50/G50P)	53
1-10. Multipoint Videoconference using 4CIF Mode	54
1-10-1. Relation between 4CIF broadcast mode and video format	54
1-10-2. Pre-confirmation items	56
1-10-3. Setting	56
1-11. Connecting to Network Cameras	58
1-11-1. Overview	58
1-11-2. User Authority	60
1-11-3. Setting Procedures in PCS Integration	64
1-11-4. Setting Network Camera Password	65
1-11-5. Setting Network Camera Setting	65
1-11-6. Registering/Editing Network Camera List	66
1-11-7. Connecting Network Cameras	68
1-11-8. Setting Network Camera itself	69
1-11-9. Communication Mode for Multipoint Connection	73
1-11-10. Web Control Function	83
2. Maintenance	85
2-1. Confirmation Procedure of Local Terminal Operation Using Self-Loop	85
2-2. LAN Communication Test Using Ping	85
2-3. Failure Analysis	86
2-4. How to Take Log	88
2-5. Updating of Software	98
2-5-1. Updating Using Memory Stick	98
2-5-2. Upgrading using FTP software	99
2-6. Service Mode	100
3. Technical Data	103
3-1. Communication Terminal Port Number Used	103
3-1-1. Without H.323MCU Option (Default)	103
3-1-2. Without H.323MCU Option (Custom: When TCP port number is set to 3000 and UDP port number is set to 3100)	103
3-1-3. With H.323MCU Option (Default)	104
3-1-4. With H.323MCU Option (Custom: When TCP port number is set to 3000 and when UDP port number is set to 3100)	104
3-2. Setting of Communication Terminal and HUB	105
3-3. Audio and Video Input/Output Characteristics of Communication Terminal	106
3-3-1. Audio Input/Output Characteristics of PCS-PG70/PG70P/PG50/PG50P	106
3-3-2. Video Input/Output Characteristics of PCS-PG70/PG70P/PG50/PG50P	106
3-4. Audio Selection List of PCS-G70/G70P/G50/G50P	107
3-5. Displayed Window during Multipoint Connection of PCS-G70/G70P/G50/G50P	108
3-5-1. Displayed Picture at Each Point in Voice Activate Mode	108
3-5-2. Displayed Picture at Each Point in Broadcast Mode with Full Screen Mode	109
3-5-3. Displayed Picture at Each Point in Broadcast Mode with Split Window Mode	110
3-6. Display Transition List of PCS-G70/G70P/G50/G50P	113

Sony PCS-G50 System Integration Guide - Page 41

Set TCP port number when Port Number Used is Custom. - default password

Page 41 highlights