Home » Sony Manuals » Video Conferencing » Sony PCS-G50 » Manual Viewer

Sony PCS-G50 System Integration Guide - Page 32

Description, Default, Registrated User Name 1 to 3 - sip

Add to My Manuals
Save this manual to your list of manuals

Page 32 highlights

(PCS-G70/G70P) Menu Page Item Description Default SIP Setup*7 1/7 SIP Server Mode Select whether to use a SIP server. Off Transport Protocol Select the protocol used in SIP. UDP Port Number Enter the port number used in SIP. Blank SIP Domain Enter the name of a SIP domain. Blank 2/7 Registrated User Name 1 to 3 Enter the user name of a terminal registered in a SIP server. Blank Password 1 to 3 Enter the password of a terminal registered in a SIP server. Blank 3/7 Registrated User Name 4, 5 (Used when there are four terminals or more.) Blank Enter the user name of a terminal registered in a SIP server. Password 4, 5 (Used when there are four terminals or more.) Blank Enter the password of a terminal registered in a SIP server. 4/7 Primary 5/7 Secondary Can be connected to four proxy servers and registry servers. Blank Enter an address and port number for each server. 6/7 Trinity 7/7 Fourth Shared Phone Book Setup*8 SPB Mode Select "On" when using the server managing the Shared Off Phone Book and select "Off" when not using it. SPB Server Address Enter the address book of the server managing the Shared Blank Phone Book. SPB Auto Registration Select "On" when automatically registering the information Off about terminals on the server managing the Shared Phone Book and select "Off" when not registering it. SPB Server Password Enter the password of the server managing the Shared Phone Book. *7: Displayed when the SIP software PCSA-SP1 that is separately available is installed. *8: Displayed when the "Shared Phone Book" in the Administrator Setup menu is set to "On". Blank 1-28 PCS-G70/G70P/G50/G50P

Section	Page
Cover	1
Table of Contents	3
1. Installation	5
1-1. Caution on Installation	5
1-1-1. Videoconferencing Room Layout	5
1-1-2. Operating Environment	7
1-2. Flowchart of Installation	8
1-3. System Connections	9
1-3-1. PCS-G70/G70P	9
1-3-2. PCS-G50/G50P	11
1-4. Initialization	13
1-4-1. Inserting Batteries into the Remote Commander	13
1-4-2. Turning On/Off the TV Monitor Together with the Communication Terminal	14
1-4-3. When the Power is First Turned On after Installation	15
1-4-4. Adjust the Volume of TV Monitor	20
1-5. System Setting	21
1-5-1. Menu Configuration	21
1-5-2. System Setting Table	22
1-6. Flowchart of Opening Test	44
1-6-1. Dialing Procedure of ISDN	45
1-6-2. Answering Procedure of ISDN	46
1-6-3. Dialing Procedure of LAN	47
1-6-4. Answering Procedure of LAN	48
1-7. Conducting a Videoconference Using the Dual Video Function	49
1-7-1. System Configuration Using 2 Cameras and 3 Monitors	49
1-7-2. Activating the Dual Video Function	50
1-8. Connecting Four Camera Units (PCS-G70/G70P)	51
1-9. Connecting Two Camera Units (PCS-G50/G50P)	53
1-10. Multipoint Videoconference using 4CIF Mode	54
1-10-1. Relation between 4CIF broadcast mode and video format	54
1-10-2. Pre-confirmation items	56
1-10-3. Setting	56
1-11. Connecting to Network Cameras	58
1-11-1. Overview	58
1-11-2. User Authority	60
1-11-3. Setting Procedures in PCS Integration	64
1-11-4. Setting Network Camera Password	65
1-11-5. Setting Network Camera Setting	65
1-11-6. Registering/Editing Network Camera List	66
1-11-7. Connecting Network Cameras	68
1-11-8. Setting Network Camera itself	69
1-11-9. Communication Mode for Multipoint Connection	73
1-11-10. Web Control Function	83
2. Maintenance	85
2-1. Confirmation Procedure of Local Terminal Operation Using Self-Loop	85
2-2. LAN Communication Test Using Ping	85
2-3. Failure Analysis	86
2-4. How to Take Log	88
2-5. Updating of Software	98
2-5-1. Updating Using Memory Stick	98
2-5-2. Upgrading using FTP software	99
2-6. Service Mode	100
3. Technical Data	103
3-1. Communication Terminal Port Number Used	103
3-1-1. Without H.323MCU Option (Default)	103
3-1-2. Without H.323MCU Option (Custom: When TCP port number is set to 3000 and UDP port number is set to 3100)	103
3-1-3. With H.323MCU Option (Default)	104
3-1-4. With H.323MCU Option (Custom: When TCP port number is set to 3000 and when UDP port number is set to 3100)	104
3-2. Setting of Communication Terminal and HUB	105
3-3. Audio and Video Input/Output Characteristics of Communication Terminal	106
3-3-1. Audio Input/Output Characteristics of PCS-PG70/PG70P/PG50/PG50P	106
3-3-2. Video Input/Output Characteristics of PCS-PG70/PG70P/PG50/PG50P	106
3-4. Audio Selection List of PCS-G70/G70P/G50/G50P	107
3-5. Displayed Window during Multipoint Connection of PCS-G70/G70P/G50/G50P	108
3-5-1. Displayed Picture at Each Point in Voice Activate Mode	108
3-5-2. Displayed Picture at Each Point in Broadcast Mode with Full Screen Mode	109
3-5-3. Displayed Picture at Each Point in Broadcast Mode with Split Window Mode	110
3-6. Display Transition List of PCS-G70/G70P/G50/G50P	113