Sony PCS-G50 System Integration Guide - Page 40
Enter DNS Domain Name System server address when, Select Auto when using DHCP Dynamic Host - ipela
View all Sony PCS-G50 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
(PCS-G50/G50P) Menu Administrator Setup LAN Setup Page Item 1 Page Item 2 Description Default 1/1 Other Settings 1/2 Web Monitor Select "On" when allowing conference monitoring function Off (auto-update of JPEG images) from the Web browser. Select "Off" when inhibiting it. Web access Selects whether to enable access from Web or Telnet to this Enabled unit. Save Setup Saves each setting data in "Memory Stick". Each set data in "Memory Stick" is overwritten. Load Setup Loads each setting data from "Memory Stick". Each setting data of this unit is overwritten. Function Extension Command Enter a command for starting the use of an IPELA VC Link service. (Service used only in Japan) Blank 2/2 AMX Device Select "On" when exporting the AMX Device Discovery On Discovery information onto the network periodically and select "Off" when not exporting it. HOP Set (enter) the HOP count (0 to 255) for the data to be exported. Blank 1/1 General 1/2 DHCP Mode Select "Auto" when using DHCP (Dynamic Host Off Configuration Protocol). Select "Off" when not using it. When "Auto" is set, IP address, net mask, gateway address, and DNS address are automatically acquired. Host Name Enter host name. Blank IP Address Enter IP address when DHCP mode is set to "Off". Blank Network Mask Enter network mask when DHCP mode is set to "Off". Blank Gateway Address Enter gateway address when DHCP mode is set to "Off". Blank DNS Address Enter DNS (Domain Name System) server address when DHCP mode is set to "Off". Blank 2/2 LAN Mode Select interface type and communication mode for LAN connection. Auto Negotiation 1/1 Gatekeeper 1/1 Gatekeeper Select "On" when using a gatekeeper and set to "Off" when Off Mode not using it. Select "Auto" when automatically searching a gatekeeper. Gatekeeper Set IP address of gatekeeper. Address Blank User Alias Set user name (H.323 alias) to be registered in a gatekeeper. Blank User Number Set user number (E.164 number) to be registered in a gatekeeper. Blank 1/1 SNMP 1/1 SNMP Mode Select "On" when enabling service of SNMP (Simple Off Network Management Protocol) agent. Select "Off" when disabling it. Trap Destination Set IP address of SNMP manager that transmits a trap. Blank Community Set community name that SNMP manager manages. Usually, set to "public". public Description This is the description of this device. Entered as "Videoconference Device". This cannot be changed. Videoconference Device Location Set the place where this unit is installed. Blank Contact Set information on the administrator of this unit. Blank (Continued) 1-36 PCS-G70/G70P/G50/G50P