Sony PCV-RX640 VAIO User Guide - Page 82

Inserting an AGP card, Locating the AGP card slot

Get Sony PCV-RX640 - Vaio Desktop Computer PDF manuals and user guides View all Sony PCV-RX640 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 82 highlights

Inserting an AGP card 1. Shut down your computer and turn off all peripheral devices, such as your printer. 2. Unplug your computer and any peripheral devices. 3. Remove the side cover. See Removing the side cover. 4. Locate the AGP card slot and remove the slot cover. Press down on the end latch before inserting the AGP card. Locating the AGP card slot 5. Firmly insert the AGP card into the slot. Lift up the end latch, if the latch does not automatically lock back into place. 6. Secure the AGP card with the screw. 7. Replace the side cover. See Replacing the side cover. 8. Reconnect all peripheral devices and the power cord. 9. Connect your monitor cable to the monitor port on the newly installed AGP card. 10. Turn on your computer and install the driver for the AGP card. See the instructions that came with the AGP card. Page 82

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
Inserting an AGP card
1.
Shut down your computer and turn off all peripheral devices, such as your printer.
2.
Unplug your computer and any peripheral devices.
3.
Remove the side cover. See
Removing the side cover
.
4.
Locate the AGP card slot and remove the slot cover. Press down on the end latch before inserting the AGP card.
Locating the AGP card slot
5.
Firmly insert the AGP card into the slot. Lift up the end latch, if the latch does not automatically lock back into
place.
6.
Secure the AGP card with the screw.
7.
Replace the side cover. See
Replacing the side cover
.
8.
Reconnect all peripheral devices and the power cord.
9.
Connect your monitor cable to the monitor port on the newly installed AGP card.
10.
Turn on your computer and install the driver for the AGP card. See the instructions that came with the AGP card.
Page 82