Sony PDW700 User Manual (PDW-700 / PDW-F800 Operation Manual for Firmware Vers - Page 144
Set the various items., Select Connect, and then press the, SET/S.SEL button or the MENU knob.
View all Sony PDW700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 144 highlights
Chapter 5 Operations in GUI Screens Item Device Type Description Path User Name Password Setting The type of the remote host • If the remote host is an XDCAM device, select the model name or "Other XDCAM model" (if the model name is not in the list) from the list of model names. a) • If the remote host is a computer, select "Others(PC Server)" from the list of model names. Comment about the remote host. (UTF-8 encoding, up to 128 characters. This setting has no effect on the connection.) The setting that you make here appears as the remote host name in the Select Remote Host screen (see step 5 of the procedure). If the remote host is a computer, path to the transfer destination directory. (This is not needed if the remote host is an XDCAM device.) User name for FTP login. (If the remote host is an XDCAM device, the default is "admin".) Password for FTP login. (If the remote host is an XDCAM device, the default is the model name, such as "pdw-700".) a) If an XDCAM device is selected as the Device Type, then the User Name and Password are set automatically to the default, and you do not need to make the Port and Path settings. Simply selecting the Host Name (or as appropriate the Description) is enough to fulfill the requirements for connection. If the User Name or Password of the device that you want to connect to changes, set them here. 8 Set the various items. To select an item Turn the MENU knob to move the cursor, and then push the SET/S.SEL button or the MENU knob. A software keyboard appears so that you can enter a setting. 9 Select "Connect", and then press the SET/S.SEL button or the MENU knob. The settings are saved and the Connecting Status screen appears. The following table lists the various stages that appear in the connection status screen and describes the corresponding processing. Item Description DNS Name When host was specified by a Resolving host name instead of an IP address, the unit is querying a DNS server for the host's IP address. ping - echo The unit has issued a ping back (communications established) command and is waiting for a response. Open Remote The unit is connecting to the Host remote host over the specified port. FTP Login The unit is logging in to the remote host with specified user name and password. Change When a path was specified, Directory the unit is changing to the specified directory. The status indicated beside each item lights in yellow during processing for that item, and lights in green when the processing finishes. If an error occurs The status indicator changes to red. Correct the condition that caused the error and repeat the operation. If you cannot connect Check the following points. • Make sure that this unit and the remote host are correctly connected to the network. • If the remote host is an XDCAM device, make sure that it is not displaying a GUI screen. • If the remote host is an XDCAM device, make sure that a disc is inserted. 144 Transferring clips (Direct FTP function)