Sony PDW700 User Manual (PDW-700 / PDW-F800 Operation Manual for Firmware Vers - Page 248
Operating on files, Exiting file operations, Start the Finder.
View all Sony PDW700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 248 highlights
Connections between this unit and a computer by the Live Logging function: Disconnected Setting of LIVE LOGGING on the REC FUNCTION page of the OPERATION menu: Values other than VIEW (OFF or LIVE) MENU ON/OFF switch: OFF Unsaved current clip list: Save or clear 2 If this unit is connected to a remote computer by FTP, log out from the FTP session (see page 250). 3 Connect the (i.LINK) S400 connector on this unit to the i.LINK (IEEE1394) connector on the remote computer, using an i.LINK cable. When a disc is inserted into this unit, the remote computer recognizes this unit as a removable disc. The following icon appears in the Finder on the remote computer, indicating that the computer is now able to perform file operations. Operation limitations during FAM connections • With the exception of the EJECT button, recording buttons and playback control buttons are disabled. • Do not use the EJECT button to eject discs. Always eject discs from the computer. • Do not disconnect the i.LINK cable during a FAM connection. Doing so may result in unstable operation. Always eject any loaded disc before disconnecting the i.LINK cable. Operating on files 1 Start the Finder. Check to be sure that a drive has been assigned to this unit. 2 Operate from the Finder on the files on the disc in this unit. You can operate in the same way that you operate on local drives and files on network computers. Notes • If you power this unit off during a FAM connection, the data transferred thus far is discarded. • All file operations are not possible for some types of files. For details, see "File operation restrictions" (page 240). To eject discs from a remote computer Click the eject button to the right of the icon for this unit in the Finder, or drag the icon for this unit from the Finder to the Trash. Exiting file operations Note Do not disconnect the cable before performing steps 1 and 2. 1 Eject the disc by clicking the eject button to the right of the icon for this unit in the Finder, or by dragging the icon for this unit from the Finder to the Trash. 2 Disconnect the i.LINK cable as required. To make a reconnection To reconnect after exiting file operations, do one of the following, depending on whether an i.LINK cable is connected. i.LINK cable is not connected: Connect this unit and a remote computer with an i.LINK cable. i.LINK cable is connected: The unit is mounted automatically, so you do not need to do anything. The unit is powered off and an i.LINK cable is connected: Power the unit on. Chapter 8 File Operations 248 File Operations in File Access Mode (for Macintosh)