Sony RDR-HX715 Operating Instructions - Page 104
Recording from the equipment, with a timer, Display, Remote control, The clock is wrong.
![]() |
View all Sony RDR-HX715 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 104 highlights
Recording does not stop after you press x STOP. , Open the remote's cover and press x REC STOP. Timer recording is not complete or did not start from the beginning. , There was a power failure during recording. Should the power failure continue for more than 1 hour, reset the clock (page 89). , Disc space was not enough. Contents previously recorded were erased. , Data that has been recorded on a DVD with a PC will be erased from the disc when the disc is inserted. , "Auto Title Erase" in the "Features" setup is set to "On" (page 97). Recording from the equipment with a timer Nothing was recorded even though you set the Synchro-Recording setting correctly. , You forgot to turn off the connected equipment. Turn off the connected equipment and set the recorder to Synchro-Recording standby mode (page 56). , The recorder was not set to the SynchroRecording standby mode. Press SYNCHRO REC to have the recorder stand by for recording. Make sure the SYNCHRO REC indicator lights up on the front panel (page 56). , The recorder is connected to the TV output jack of the connected equipment. Synchro-Recording does not complete. , The timer setting for the connected equipment overlapped the recorder's timer setting (page 57). , There was a power failure during the recording. The recorder automatically starts recording when the satellite receiver is turned on. , The Synchro Rec function was activated. Turn off the satellite receiver and cancel the Synchro Rec function (page 56). Display The clock has stopped. , Set the clock again (page 89). , The clock stopped due to a power failure that lasted for more than one hour. Reset the clock (page 89). The clock is wrong. , Set the clock again (page 89). If you cannot set the clock, wait until the clock data is received and the clock is automatically adjusted. The TIMER REC indicator is flashing. , The disc does not have enough space. , Insert a recordable disc inside the recorder. The recording mode indication is incorrect. , When the recording or dubbing is less than three minutes, the recording mode indication may be displayed incorrectly. The actual recording itself is correctly made in the selected recording mode. , After playing titles recorded in SLP and SEP mode, the recording mode indication may change depending on the recorded program. The clock does not appear in the front panel display. , "Dimmer" in "Options" setup is set to "Power Save" (page 98). Remote control The remote does not function. , Batteries are weak. , The remote is too far from the recorder. , The remote's manufacturer code returned to the default setting when you replaced the batteries. Reset the code (page 22). , Turn on the recorder. , The remote is not pointed at the remote sensor on the recorder. , Different command modes are set for the recorder and remote. Set the same command mode (page 24). The default command mode setting for this recorder and the supplied remote is DVD3. , Set the TV/DVD switch to DVD (page 24). 104
![](/manual_guide/products/sony-rdrhx715-operating-instructions-aec8900/104.png)