Sony RDR-HX715 Operating Instructions - Page 92
Output, Y/Pb/Pr Out Black Level, Progressive Mode, format TV using the COMPONENT VIDEO OUT
View all Sony RDR-HX715 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 92 highlights
4:3 Output This setting is effective only when you set "TV Type" in "Video" to "16:9." Adjust this to watch 4:3 aspect ratio progressive signals. If you can change the aspect ratio on your progressive format (480p) compatible TV, change the setting on your TV, not the recorder. Note that this setting is effective only for HDMI connection or progressive signals output from the COMPONENT VIDEO OUT jacks. Full Normal Select this when you can change the aspect ratio on your TV. Select this when you cannot change the aspect ratio on your TV. Shows a 16:9 aspect ratio signal with black bands on left and right sides of the image. 16:9 aspect ratio TV Y/Pb/Pr Out Black Level Selects the black level (setup level) for the video signals output from the COMPONENT VIDEO OUT jacks (page 18). This setting is not effective when the PROGRESSIVE indicator lights up on the front panel and the recorder outputs progressive signals. On Raises the standard black level. Select this when the picture appears too dark. Off Sets the black level of the output signal to the standard level. Normally, select this. Y/Pb/Pr In Black Level Selects the black level (setup level) for the NTSC video signals input from the COMPONENT VIDEO IN jacks (page 15). This setting is available when "Line1 Input" is set to "Component" (page 93). On Raises the standard black level. Select this when the picture appears too bright. Off Sets the black level of the input signals to the standard level. Normally, select this. Progressive Mode DVD software can be divided into two types: film based software and video based software. Video based software is derived from TV, such as dramas and sit-coms, and displays images at 30 frames/60 fields per second. Film based software is derived from film and displays images at 24 frames per second. Some DVD software contains both Video and Film. In order for these images to appear natural on your screen when output in PROGRESSIVE mode, the progressive video signal needs to be converted to match the type of DVD software that you are watching. You can fine-tune the progressive 480p video signals that are output when you press PROGRESSIVE ("PROGRESSIVE" lights up). Note that you must connect to a progressive format TV using the COMPONENT VIDEO OUT jacks (page 18). Auto Automatically detects the software type (Film-based or Video-based) and selects the appropriate conversion mode. Normally select this position. Video Fixes the conversion mode to the mode for Video-based software. 92