Sony RM-AV2100 Operating Instructions (primary manual) - Page 43
Receiving the data, Press the ENTER key., While pressing COMMANDER, OFF, press CHANNEL -
UPC - 027242612044
View all Sony RM-AV2100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
7 Press the "ENTER" key. When the data has been transferred, "TV" and "M" go off. If the data have been successfully transferred, the backlight of the display turns off. Note If "NG" appears while sending the data, go back to Step 6 and continue the operation or press COMMANDER OFF to stop the operation. Notes • The data of the "learned" signal and the System Control function programmed for a Component Select button cannot be transferred. You can use the learning function (page 32) to program the "learned" signal and the System Control functions programmed for a Component Select button on another remote commander. • Be sure that the receiving remote commander is ready to receive data. Receiving the data This Commander can receive the data of another Sony RM-AV2100 or RM-VL900. To receive the all data from another remote commander 1 While pressing COMMANDER OFF, press CHANNEL - and VOLUME -. Continued 43