Sony SCD-C555ES Operating Instructions - Page 7
Press MENU. - cd player
View all Sony SCD-C555ES manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
Getting Started Connecting via DIGITAL (CD) OUT OPTICAL connector Use an optical digital cable for this connection. When connecting the optical digital cable to the DIGITAL (CD) OUT OPTICAL connector, take the cap off the connectors and push the cable plugs in until they click into place. Be careful not to bend or twist the optical cable. Optical digital cable (not supplied) Note Only the audio signals of conventional CDs can be output from the DIGITAL (CD) OUT connectors. Those of the Super Audio CD cannot be output through DIGITAL (CD) OUT. Connecting via DIGITAL (CD) OUT COAXIAL connector Use a coaxial digital cable to connect the audio components equipped with coaxial digital input connectors. Coaxial digital cable (not supplied) Note Only the audio signals of conventional CDs can be output from the DIGITAL (CD) OUT connectors. Those of the Super Audio CD cannot be output through DIGITAL (CD) OUT. Connecting the AC power cord Connect the AC power cord to a wall outlet. About the CONTROL A1 jack If you have a Sony component with the CONTROL A1 (or CONTROL A1) jack Connect the component via the CONTROL A1 (or CONTROL A1) jack with a monaural (2P) mini-plug cord. You can simplify the operation of audio systems composed of separate Sony components. For details, see "Using the CONTROL A1 Control System" on page 31. When using another Sony CD player in conjunction with this player You can set the supplied remote to be effective on this player only by changing the command mode of the remote. If you connect this player to another Sony CD player, you have to set the command mode of each player. To set the command mode of the remote • If the other player's command mode can be set: Set the CD1/2 switch of this player's remote to CD1 (factory setting), and set the other player's remote to CD2. • If the other player's command mode cannot be set: Set the CD1/2 switch of this player's remote to CD2. To set the command mode of this player 1 Press MENU. 2 Turn l AMS L to select "COMMAND MODE." 3 Push l AMS L. The current command mode appears. 4 Turn l AMS L to select CD1 or CD2, then push l AMS L again. Transporting the player Before transporting the player, follow the procedure below to return the internal mechanisms back to their original position. 1 Remove all the discs from the disc tray. 2 Press A OPEN/CLOSE to close the disc tray. "No Disc" appears in the display. 3 Wait for 10 seconds, then press POWER to turn off the player. 7US