Sony SLV-272 Operating Instructions - Page 25
Streaks, Noise, Bands, Appear, Adjust, Sharpness, Picture
View all Sony SLV-272 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
If Streaks or Noise Bands Appear DIGITAL AUTO TRACKING indicator t I rl. 17 • Ar m.' C:2, 0 0 c 1=1 000001 AUTO TRACKING TRACKING v/A Automatic adjustment Press AUTO TRACKING during playback. The DIGITAL AUTO TRACKING indicator lights and the -" indicator appears in the display window. Manual adjustment If the noise level is not reduced even when AUTO TRACKING is pressed, adjust the tracking manually by pressing TRACKING or A. MM. When you press A • Tracking center position I When you press About three seconds after the button is pressed, the counter display will reappear. To Adjust the Sharpness of the Picture SHARP: To get a sharp picture SOFT: To get a soft picture SHARPNESS 'Cs SOFT SHARP When the auto tracking function works automatically (for about four seconds) • When the tape is played back just after the tape is inserted. • When the tape speed is changed. When a prerecorded tape with the copyguard system is played back The intermittent distortion may appear in the upper portion of the picture. However it is not failure of this unit. On the blue-screen display When a blank tape is played back, the backgroud becomes blue, and the sound is muted. Except during normal playback, however, the blue-screen display does not appear even when a blank portion of the tape is reached. Note Sufficient picture quality may not be obtained when playing back tapes recorded on another VCR, or tapes with unsatisfactory recording. 25