Sony SNC-M1 User Guide - Page 20

Date & time Tab, Initialize Tab, Current date & time, PC clock, Date & time format, Adjust - snc m1w installation manual

Get Sony SNC-M1 PDF manuals and user guides View all Sony SNC-M1 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 20 highlights

Administrating the Camera Date & time Tab Current date & time Displays the date and time set on the camera. Note After you have purchased the camera, be sure to check the date and time of the camera and set them if necessary. PC clock Displays the date and time set on your computer. Date & time format Select the format of date and time to be displayed on the main viewer from the drop-down list. You can select from among yyyy-mm-dd hh:mm:ss (year-month-day hour:minute:second), mm-dd-yyyy hh:mm:ss (month-day-year hour:minute:second), and dd-mm-yyyy hh:mm:ss (day-month-year hour:minute:second). Adjust Select to set the day and time. Keep current setting: Select when you do not need to set the date and time. Synchronize with PC: Select when synchronizing the camera's date and time with those of the computer. Manual setting: Select when you want to set the camera's date and time manually. Select the lower 2-digits of year, month, date, hour, minutes and seconds from each drop-down list. Synchronize with NTP: Select when synchronizing the camera's date and time with those of the time sever called NTP server (Network Time Protocol). Set the NTP saver name and the Interval. NTP server name Type the host name or IP address of the NTP server, up to 64 characters. Interval Select the interval at which you want to adjust the camera's time referring to the NTP server' time, between 1 and 24 hours. The set interval is a guide, and does not indicate the exact time. Note The setting time may not accord with the exact time according to the network environment. Time zone Set the time difference from Greenwich Mean Time in the area where the camera is installed. Select the time zone where the camera is installed from the drop-down list. Adjust clock for daylight saving time changes When you select it, the clock is adjusted according to the daylight saving time of the selected time zone. Notes • If the time zone selected on the Time zone menu is different from that set on the computer, the time is adjusted using the time zone difference and set on the camera. • The daylight saving time adjustment works only when Adjust is set to Synchronize with NTP. OK/Cancel See "Buttons common to every setting menu" on page 17. Initialize Tab Reboot Reboots the camera. Click Reboot, and "The SNC-M1 (or SNC-M1W) will be rebooted. Are you sure?" appears. Click OK to reboot the camera. It takes about two minutes to start again. 20 Configuring the System - System setting menu

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
Administrating the Camera
Configuring the System — System setting menu
20
Date & time Tab
Current date & time
Displays the date and time set on the camera.
Note
After you have purchased the camera, be sure to check
the date and time of the camera and set them if
necessary.
PC clock
Displays the date and time set on your computer.
Date & time format
Select the format of date and time to be displayed on the
main viewer from the drop-down list.
You can select from among
yyyy-mm-dd hh:mm:ss
(year-month-day hour:minute:second),
mm-dd-yyyy
hh:mm:ss
(month-day-year hour:minute:second), and
dd-mm-yyyy hh:mm:ss
(day-month-year
hour:minute:second).
Adjust
Select to set the day and time.
Keep current setting:
Select when you do not need to
set the date and time.
Synchronize with PC:
Select when synchronizing the
camera's date and time with those of the computer.
Manual setting:
Select when you want to set the
camera's date and time manually.
Select the lower 2-digits of year, month, date, hour,
minutes and seconds from each drop-down list.
Synchronize with NTP:
Select when synchronizing the
camera's date and time with those of the time sever
called NTP server (Network Time Protocol). Set the
NTP saver name
and the
Interval
.
NTP server name
Type the host name or IP address of the NTP server, up
to 64 characters.
Interval
Select the interval at which you want to adjust the
camera's time referring to the NTP server' time, between
1 and 24 hours.
The set interval is a guide, and does not
indicate the exact time.
Note
The setting time may not accord with the exact time
according to the network environment.
Time zone
Set the time difference from Greenwich Mean Time in
the area where the camera is installed.
Select the time zone where the camera is installed from
the drop-down list.
Adjust clock for daylight saving time changes
When you select it, the clock is adjusted according to the
daylight saving time of the selected time zone.
Notes
•
If the time zone selected on the
Time zone
menu is
different from that set on the computer, the time is
adjusted using the time zone difference and set on the
camera.
•
The daylight saving time adjustment works only when
Adjust
is set to
Synchronize with NTP
.
OK/Cancel
See “Buttons common to every setting menu” on page
17.
Initialize Tab
Reboot
Reboots the camera.
Click
Reboot
, and “The SNC-M1 (or SNC-M1W) will
be rebooted.
Are you sure?” appears.
Click
OK
to
reboot the camera.
It takes about two minutes to start
again.