Sony SNC-M1 User Guide - Page 24
Reset Tab, Configuring the Network – Network setting Menu, Network Tab, Network setting Menu - default ip address
View all Sony SNC-M1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
Bandwidth control When the video mode is set to JPEG, the network bandwidth can be limited. Selectable bandwidths are 0.5, 0.6, 0.7, 0.8, 0.9, 1.0, 2.0, 3.0, 4.0, and Unlimited Mbps. When you do not wish to limit the bandwidth, select Unlimited. OK/Cancel See "Buttons common to every setting menu" on page 17. Reset Tab Configuring the Network - Network setting Menu When you click Network on the Administrator menu, the Network setting menu appears. Use this menu to configure the network to connect the camera and the computer. The Network setting menu consists of 3 tabs: Network, Wireless network and Dynamic IP address notification. Network Tab This section provides the menus for connecting the camera through the network cable. Administrating the Camera Reset Click Reset, and "Camera menu setting is reset to default. Are you sure?" is displayed. To reset to default, click OK. MAC address Displays the MAC address of the camera. Obtain an IP address automatically (DHCP) DHCP server is installed on the network. Select it when the IP address is assigned by DHCP server. IP address is assigned automatically. Note When you set Obtain an IP address automatically (DHCP), make sure that DHCP server is working on the internet. Use the following IP address Select this when a fixed IP address is set. IP address Type the IP address of the camera. Subnet mask Type the subnet mask. 24 Configuring the Network - Network setting Menu