Sony SNC-M1 User Guide - Page 39
Date time Tab, Rebooting the Camera, Date time, format, Time zone selecting, Manual, current date time
View all Sony SNC-M1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
Date time Tab You can set the date and time on the camera. 1 Click the Date time tab to display the date/time setting window. Notes • Due to network properties, there may be a slight difference between the displayed computer's date and time and those set on the camera. • The PPPoE cannot be set in this unit. Rebooting the Camera Click Reboot on the Network tab to reboot the camera. It will take about two minutes to start again. Others 2 Click to select the camera you want to set the date and time for. You can select multiple cameras and set the date and time simultaneously. 3 Select the date/time format from the Date time format drop-down list. 4 Select the area where the camera is installed from the Time zone selecting drop-down list. 5 Set the date and time. You can set the date and time in two ways. Manual current date time setting Set the current date and time on the Manual current date time setting boxes, and click OK. The setting boxes are for the year (last two digits), month, date, hour, minutes and seconds from left to right. PC current date time setting The date and time set on the computer is displayed in the PC current date time setting box. Click OK on the right to set the camera's date and time to the displayed computer's date and time. 39 Using the Supplied Setup Program